













Mirka 9A-232-AP Abranet 5-Inch Mesh Grip Discs
-
Peter C
> 24 hourThese pads are very durable , easy to use and clean afterwards. I like that the assortment had a range of grit pads that can accommodate a variety of projects.
-
Christopher Osborn
> 24 hourDid a great job on an epoxy table
-
Prof. Domenic Senger DDS
> 24 hourHavent used this grit yet but the others that I have work pretty good at removing old finish since they dont seem to gum up like normal paper.
-
firefighter
> 24 hourJust sanded 25 drawer fronts. Impressed on the lack of sanding dust that escaped from around the sander. Did not even have to wear a dust mask which I have always considered mandatory. After going through all grits up to 320, a final wipe down with naphtha found only a little dust. Disks DO last a LOT longer. I would guess 10 to 20 times longer. I normally expect a disk to last through maybe 4 to 6 sq ft. These lasted LOTS LONGER. Highly recommend. Seldom give 5 stars but this product is not only better than expected, it also is well worth the increased cost.
-
Sean Dineen
> 24 hourThe discs themselves are fine. But like some others have said, I did not receive 400 or 600 grit even though the images and the box I received indicate I should have. Those were part of the main draw and their absence certainly decreases the value proposition rather significantly.
-
Maria Tyre
> 24 hourThese mesh discs are great for final finish sanding. Fits on my Festool finish sander... no holes to match pattern for vac system. Mesh also minimizes pigtail swirls.
-
Mrs. Marianna O'Kon
> 24 hourAbranet discs are the way to go. Expensive but they last longer and dust is not an issue.
-
Curmudgeon
> 24 hourWhen connected to an extractor (vacuum) the net and the accessory pad pulls nearly all the dust out of the air and keeps the workpiece clean so you get a much better finish. I started using these to sand cabinet doors between coats and the final finish is extraordinary.... even with an orbital sander. Theres also a hand pad for areas too delicate for a machine.
-
Netts
> 24 hourI use these abrasives on a Festool sander with a pad. Works very well providing a smooth even finish. Long lasting as they stay clean. I like them better than traditional sanding discs. Will by other grits as well.
-
Not Even Close to my Real Name
> 24 hourI use it with a festool sander hooked up to a vacuum, and there is no dust in the air whatsoever. Only the tiniest film of dust remains on the wood surface after sanding, which wipes up easily with a microfiber cloth. The sanding action itself is superb, the low grades cut quickly, and the high grades will leave a glassy smooth finish even on a soft surface like baltic birch ply.