Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
ichigti
> 3 dayケースはクーラーマスターのNR200で5950xに使用していますが、サイドからうまく吸気してくれるのでよく冷えます。
-
Nathan C
> 3 dayYep...this cooler exudes quality and cools my CPU, like no other.
-
Reviewer with Integrity
> 3 dayQuiet and performance is great
-
Lorronie
> 3 day大抵ＣＰＵ付属のクーラーで済ませているのですが、Ryzen3900Xで８０°Ｃ、ファンもゴーっと鳴ってることから、十数年ぶりにクーラー買いました。マザーボード X470 Master SLI ケース Antec nine hundred グラフィックカード MSI GeForce GTX 1660 Ti AERO で、用途はPremiere等での動画の編集です。 NH-U12Aも考えましたが、ケースの大きさが心配で。 取りつけは思ったよりもずっと簡単でした。 若干４ピン8ピンのケーブルが通り道になってはしまいますが(下側にファンをつけたので）、何とかつながりました。 レンダリング中１２°くらい下がった感じで、まあよいのではないかと思ってます。音はものすごく静かというわけではないように感じますが、このケースなので他のファンの音と混ざっているから・・・少なくても「ごー」ではないので、よいかと思ってます。夏場になるともう少し厳しいのかもしれません。
-
M Remo
> 3 dayIt fits like a glove when you need a low profile, premium air cooled heatsink. This fit just barely in my Corsair Air Carbide 240 MATX cube case and on a Gigabyte GA-Z170MX-Gaming 5 MATX mobo. I had to mount the fan on the bottom side to meet the clearance of the case, but if you have more space, you could add a second fan so that there are dual fans in push-pull config. I have it cooling an I5 6600K which is currently OCd and with Prime 95 running, Im still under 60C.
-
Mike
> 3 daySimply amazing. From the box to the temps this is hands down a great cooler. I was going to go with the nh-d15s but I wanted something unique, this also covers my entire motherboard. I was really scared of this when I ordered it but I installed it right away and the only difficult part was installing the CPU header and a chasis fan header.
-
José Pérez
> 3 dayCuando los instales te recomiendo quitar el ventilador, por que en las aletas de aluminio tiene un par de huecos para atornillar la base del cooler, pero el ventilador tapa uno de los huecos no importa en que posicion lo coloques. Me redujo unos 10 grados del ryzen 2600x comparado con el cooler de fabrica
-
Perry D
Greater than one weekQuality construction, easy install and very quiet!
-
Keith Pelletier
> 3 daycooler très silencieux et efficace, possibilité de rajouter une autre fan..un peu volumineux par contre donc faire attention si vous avez beaucoup de RAM ou une grosse carte graphique
-
Kurtis Sasso
> 3 dayIf you dont have room in your computer case this is one of the best fans you can get.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
Related products
