Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Anzu29
19-11-2024Vérifier sur le site de Noctua que votre carte mère soit compatible à 100% avec ce ventirad (pour la place carte graphique surtout).
-
S.M.K.
> 3 dayCame with everything but the mounting kit. Zero Stars. Otherwise I like your product. But thanks for a cool fan I cant do anything with.
-
RK5
> 3 dayCheck compatibility carefully on Noctuas helpful website, including case height and RAM clearance - if using RAM with large coolers second fan may not be usable. Read installation instructions carefully. Subject to that it seems well built and does a good job. Plastic protective cover had fallen off in the box, but no visible damage.
-
Barbie Boop
> 3 dayWorks great
-
N. Henderson
> 3 dayi9 9900K.
-
Tezoro
Greater than one weekI replaced my h100i v2, my aio cooler died a few days ago and over time I think it wasn’t cooling as it should have been. With the aio cooler I would reach up to 90c under full load, finally the pump failed. I did a bunch of research and found that aio pumps will always fail eventually, so I wanted to go back to air cooling. I have to say I pretty much won the lottery when I found the dh15 from Noctua. From the excellent packaging and clear instruction manual this thing gets 5-stars from me. Right out of the box this cooler is massive so make sure you look up your case and make sure the dimensions can handle the size. It took around 10minuted to install, it comes with Noctua thermal paste which is really high quality stuff. As far as temps I was getting 34c in bios and under load it never went above 60c man... that’s impressive. All I have to say is if you’re thinking about going back to air cooling this is a must buy. Thanks Noctua for making a beast cooler!
-
Sylvan Heaney
> 3 daysuper quiet and sits around 55C under load Vs 85C for the stock cooler
-
HClarkx
> 3 dayI checked dimensions, and sure enough, this cooler worked perfectly on an Asus ROG Strix B760-I ITX motherboard in an Antec ISK600 ITX case. It fit like a glove, but cleared all of some pretty tall mobo heat sinks and similar. And the fans could be set low enough to clear the case lid. The rear fan could be set low enough to blow air directly over the RAM in my case. A fan header to put both fans on one fan mobo connector was included (this ITX mobo has only two Q fan ports (also has an AIO fan port but that one is not speed controlled so isnt useful for a CPU or Case fan.
-
Copper Grove Designs
Greater than one weekJust installed this on a i7-12700K, 22 degrees C idle temperature.
-
ShaunMurphyszz
> 3 dayKeeps my 10700f with PL1 set to 255w cool at 40c idle and 60c under load. It is a massive cooler!
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
