Replacement Screen for White iPad Mini Touch Screen Digitizer IC Chip Home Button and Flex Cable Assembly WiFi or Cellular or with Retina Display Model# A1432, A1454, A1455, A1489, and A1490

After battling for months through multiple digitizers with a much more well known iPhone/iPad parts company I finally gave up and decided to try a different company. $20 and 20 minutes later and I had a working iPad again. Thanks!!!!

The package came with a bad digitizer and only had 3 sides with adequate glue. the home button also moves around and did not stay in place. The bad digitizer was not apparent until a week after installing it on the ipad with limited use.

(^ Thats what she said) But really I believe this product is just too long for the screen vertically. I replaced my cracked screen myself and know Im not perfect but the whole screen will not fit to the mold in the iPad Minis body. Other than that this replacement screen works but the home screen will sometimes get stuck because a fragment of the screen at the bottom hangs off so slightly that it makes room internally for the home button to stick.

Beautiful experience.. A++++

Glitches after install. Like a ghost is touching the screen.

Great price and worked great. No instructions provided, but thats what Youtube is for.

100% perfect replacement part - Installed without issue.

Good product. I had a little trouble with the display jumping around a little but put a little more tape along the bottom side of the screen and it works fine. This digitizer works well

This was a perfect replacement for my wifes shattered iPad mini screen. Hopefully her mini doesnt get dropped again, but if it does this is the screen I will replace it with.

These digitizers get LOTS of bad reviews because of ghost touching or it broke when I was installing it but I really believe its installer error. Ive installed 5 of these digitizers and all have gone perfectly. These are not ready to go right out the box. You have to use Kapton tape in order to install it correctly. You need to cover all of the solder points so they wont make contact with the metal frame. You will also need to apply a layer of double-sided tape onto the metal frame so the new glass will not start to lift off. It also makes up for the glass not been the exact same thickness. These aftermarket digitizers are not going to be an exact fit as far as the glass being the same thickness as the original Apple digitizer. Ive done phones tablets and laptops I have had my fair share of bad products but these 5 that I have purchased from Amazon have been great.