Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect
-
Robert L. Crane
> 3 dayToo good to be true?? Yep!!! You cant get a quality sand blaster for $30. I tried but it simply does not work. Product failed from the very firsr use. Could not get it to suck up media. Followed all the instructions exactly.
-
Chris Williford
> 3 dayLike, blasting a car
-
Sub Prime
> 3 dayLooks great, fast shipping with prime, can’t wait to use it.
-
Happy camper
> 3 dayDidn’t work with my pressure washer set up but great customer service. The tube would only barely draw bone dry fine sand about 1 foot into the tube. 3200, 2.4 are my sprayer specs. I sprayed water for 30 minutes trying. I could see how it would work well if you can get the suction draw going.
-
J. D.
> 3 dayIm pleasantly surprised by this. When I bought it they didnt have the 3.0 nozzle which wouldve been better sized to my 2700 psi 2.3 gpm pressure washer. I got the 3.5 and it worked perfectly for removing 50 years of rust, dirt, and grime from frame parts. I wouldve been happy getting flaky rust and the grime off but this easily got the parts to bare metal. The hardest part is keeping small parts held down so they dont fly off. Ill probably use some lags screws and old plywood next time. If you own a decently sized pressure washer dont hesitate to buy this.
-
Rocky Mills
> 3 dayI just received my kit and hope to start using it within the next few days .
-
Edward
> 3 dayOverall, it works well enough as it does what it is supposed to do. However, the suction hose is not long enough to keep your dry sand out of the way of water spray/ splash from using the blaster. A person could cover the bucket of sand with a plastic bag but then you wouldnt be able to see the sand level and tilt the bucket accordingly. 3 stars I would say, 4 stars if it had a sufficiently longer hose.
-
Glenn James
> 3 dayThis thing is amazing. I was skeptical. Local shop wanted 1800 to do my car. I did engine bay and frame on 72 Chevelle myself. Thing is impressive. Used regular 2700 psi compressor. Be prepared. Takes awhile. And eats sand up. Took 5 50lb bags to do engine bay and frame. Keep sand above wand or it gets wet and plugs hose. Would recommend all day
-
DaddyAwesome
Greater than one weekThere is minuscule suction on the sand tube. Not enough suction to get the sand to nozzle. I did not test it when it first got here (March). Amazon will not do anything about it. I have sent message to the store but no one has given me the courtesy of answering my messages. I am so tired of doing business with 3rd party sellers. Personally I am through with 3rd party sells and 3rd party stores. They are ridiculous to deal with. NO SUPPORT!!! DONT WASTE YOUR MONEY ON THIS TOOL....
-
Jennifer o.
> 3 dayWorked amazing for the job, I couldn’t be happier.
Tool Daily: The Great Brand for Pressure Washer Accessory
Tool Daily are committed to developing more efficient and safer pressure washer accessory, helping people reducing the tiredness of spraying and cleaning in the garden. We are known for amazing pressure washer accessory, such as nozzle, wand, gun, coupler, foam cannon. We do everything in our power to ensure customer’s full satisfaction with the product quality and service.
SPECIFICATION
Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack".
- 1. Minimum Flow Rate: 3 GPM
- 2. Minimum Pressure: 3000 PSI.
- 3. sand into water system.
- 4. Max Working Pressure is up to 5000 PSI.
- 5. 1/4 Inch Quick Connect.
- 6. Temperature is up to 140°F/60℃.
- 7. Orifice 3.5.
Application
Pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.
How to Set Up
1. Connect 1/4’’ quick connect plug (B) to pressure washer trigger gun or wand.
2. Insert sand wand (C) into media (dry silica sand, baking soda or washed and dried river sand). Please make sure the sand is dry, or it will not work.
3. Turn on the pressure washer. Unlock the trigger gun, then water and sand will come out from permanent nozzle (A). Please make sure the part D is above permanent nozzle (A). If the part D is underneath permanent nozzle (A) as the image shown, the water will go into the hose of sand, wet the sand and then sand will not be sucked up.
4. After work, please dry the cleaned goods as soon as possible, otherwise they will rust again the next day.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Pressure Washer Sandblasting Kit, Sand blaster Attachment | Pressure Washer Sandblasting Kit | Dual-Function Undercarriage Cleaner | Replacement Sandblasting Nozzle 5000 PSI | Pressure Washer Extension Wand | High Pressure Washer Gun, with Replacement Wand Extension | |
| Specification | Orifice 2.5 | Orifice 3.5 | 1/4” Quick Connect | 5000 PSI | 1/4 Inch Quick Connect | M22 Fitting |