TORACK 3Pcs Metal Pegboard Panels for Wall Garage Utility Tools Pegboard Storage System for Workbench, Shop, Shed Modular Peg Board Organizer Board Kit(Pack of 3, Grey)

These were perfect for my kids art station. Easy to install on the wall and there are so many fun things you can use as storage.

In the interest of full disclosure, as a trusted and unbiased Amazon reviewer, I was able to request this product free of charge. Nicely made racks, heavy weight and durable. Clean finish. There is a rolled edge on the top and bottom. There are no welds in any of the corners that I can see; however, this doesnt matter as these are plenty strong. These do not accept 1/4 inch hooks. I have some hooks that measure 3/16 of an inch and although these will insert into the holes, they will not make the bend in order to be used. These racks work fine with 1/8 inch hooks only. When mounted, the distance from the wall is approximately 11/16 of an inch - more than adequate spacing to insert your hooks. A nice product just wish they accepted 3/16 - 1/4 inch hooks.

The powder coating is even and thick enough to be durable. The hole spacing is spot-on. I will be installing these into a wooden frame and they will become the focal point of my home wood shop. I had never thought about using metal peg-board before but I am so glad I found these. Granted, they arent as inexpensive as traditional pegboard but that stuff is getting pricey too. If you want to show off a tool collection of simply want a better than average pegboard to put your chisels, you found it.

This kit comes with three metal pegboard panels and mounting hardware. Each pegboard has a white painted finish that is scratch resistant and durable. The pegboards are available in white or black. The heavy duty metal will hold up to years of use, abuse and heavy loading. The pegboard hole pattern will fit any 1/4 and 1/8 hangers (not included). I mounted these on the wall in my garage and had no problem loading them up with tools. In fact, Ill likely get more pegboards to help organize the rest of my tools. Would recommend this to anyone.

These worked great for what I needed. Hung them up in my garage. Much sturdier than the particle board ones I had.

I been wanting a peg board to hang my small tools wire and quick reach items. I didnt like the particle board solution so I got this metal one. Its way more sturdier than the wood ones. Not to mention if my garage rood leaks, the metal will not melt. Ot get damaged too much by the water.

Ive been wanting to do a pegboard wall in my garage for awhile, but was more work than I cared to do. So it just stayed on the some day list...Saw these panels and thought Id give them a try. They install easily (hardware is include) and the spacing behind the face for the hooks is built in. Simply attach to the wall and good to go! It always easy to find second hand hardware for hooks, rods, etc. so a trip to the restore and Im all set. Solid, well finished, and heavy duty. Very happy

I had a wood one in the last in my other shed but this metal one is superior. Love it. But will need to get 3 more panels due to the size. They are amazing. Very sturdy and heavy duty

I have to say I love that they came with the screws AND the anchors, but the holes in the pegboard were too small to insert a pencil into for marking the wall for the drill points. I had to use the pointy end of a long skinny awl to mark the wall. Also I had to employ a bit of trial and error because the diagrams/packaging did not indicate the sizes of drill bits needed for installation. It also mentions you need a hammer but never mentions the hammer being used in any of the text directions. I took measurements (and notes) as I installed the first board to make installing the other two pegboards easier. Ill share those measurements here. For inserting the anchors into the wall I used a 5/16 drill bit. The top far left hole is 11 away from the far right top hole. The top left hole is 22 7/8 from the bottom left hole (and of course the same distance goes for the holes on the far right side. If one or more holes are over a stud, you wont need the anchor. For that hole you would use the 3/16 drill bit. As you can see in my photo, I did not install them immediately next to each other but instead chose to install each of the three in between the tracks for my track mounted shelving system in my sewing room. Now I can use my existing shelf brackets and shelves until I get more pegboard accessories. Definitely recommend them. I can use magnetic hooks, pegboard hooks, etc. I have been wanting pegboard but much preferred the idea of having it be metal.

We were looking for storage ideas for my wifes craft room, and came across these panels. She was wanting to redo her storage, and did not want to use a wood pegboard, so these fit the bill. They came in a box well protected, and there were no scratches, scrapes, or dings on any of the panels. They were easy to install, and they fit the peg bins, hooks, and shelves that my wife had purchased previously without an issue. The panels are strong, so there has been no issue of the panels bending or breaking, but my wife over filled one shelf that had plastic hooks, and the shelf broke, but did not harm the metal pegboard at all. These are great for the craft room, but after seeing them, I am thinking about ordering some for my garage, I just need to get rid of some stuff first to make room on a wall.