WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
nalbacher
> 24 hourDa gibt es nicht viel zu schreiben. Das LAN-Kabel funktioniert. Vielleicht ist anzumerken, daß der Schutz über der kleinen Kunststofffeder ziemlich wuchtig ist und es beim Entfernen des Steckers zu viel Fummelei kommt. Aber so oft entfernt man das Kabel ja nicht und wenn es funktioniert ist das auch OK.
-
CHRISTINE
> 24 hourWorks very well at our campground where the campground public router is about 300 away. I get a very strong signal from the TP-Link. Very pleased with it!
-
Janine
> 24 hourIch benötigte ein langes Kabel von meinem Router zum TV und deshalb habe ich mir dieses Kabel gekauft. Das Kabel ist so wie es sein sollte.
-
KIMBERLY
> 24 hourExcellent product. Super easy to set up, and cleared up dead zones in our house.House is about 2500 sq ft. I would highly really recommend this product!!
-
ALBERT
> 24 hourDi It has definitely extended the range of my C6300 I have; however I have noticed unreliable connections to the dual-band SSID on my network. I probably am able to get it to connect about 90% of the time correctly. The other times I fell back to my AT&T signal in the house on our iPhones.Installation was straightforward and only took 5 minutes to get it going.
-
BENJAMIN
> 24 hourI had a Smart TV that had poor connection. As the distance between the two is over 80ft. I bought it and used as directed. The result was a good wifi connection for the TV.The setup is as easy as it could be, clear step-by-step instructions.
-
Trevor Top
> 24 hourWorking flawlessly with my FIOS Quantum router. 5 stars for making it seamlessly work without a pain to set it up. Open the box, plug it in, press WPS on Router -- BOOM.
-
anTTraXX
> 24 hourhaben uns das kabel gekauft das es doch recht preiswert ist und in schwarz ein dfach nur geil aussieht mit den roten Klipsen.
-
PATRICIA
> 24 hourWorks as it should. I did have a bit of a challenge with the setup. I followed the instructions and it didnt work. I used my limited self-taught computer skills to make it connect. Works perfectly to extend range of my Wi-Fi to a corner of the house not otherwise reached. pretty easy to set up. About 2 months use so far.
-
JEREMY
> 24 hourIll be danged if this didnt just plug and play as advertised. I should have bought 10 of these things years ago. Its magic and its fun!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
