XLNT TECH Engraving Double Color Sheet (7 x 11“ x .040”, 12 Pieces & 12 Colors) for Interior Signs, Badges.
-
Derick Esquivel
> 3 dayDid not work for engraving with a 40W CO2 laser. Burns up even at 4% power. Does not engrave or cut without really bad surface finish.
-
Cora Fowler
> 3 dayThe smell is awful, and the core is NOT white - its a muddy grey. I will be returning this product.
-
Gary Holtz
> 3 dayVery low quality. Dont waste your money
-
T. Laynor
Greater than one weekPurchased this as it came with various colors and said it was LASER engravable. Normally the top layer will cleanly vaporize with LASER application, but in this instance it melted and the surface finish was pebbly, not smooth. Tried various power settings, but did not achieve a smooth, clean engrave. This maybe a rotary-only engravable product.
-
Jaydon VonRueden MD
> 3 dayGreat material, but mine came at 0.043” instead of advertised 0.060”. Measure and setup CNC machine properly.
-
Torrey Carroll
> 3 dayMy laser hates ABS. Engraving the white second layer doesnt come through as white. Its an uneven sooty grey. Trying to cut this with the laser leaves wisps of soot all over the interior of the K40. This is probably better suited for CNC engraving.
-
bboisvert
> 3 dayVery easy to use, flexible, convenient. Used for project awards.
-
Trinidad Sanchez
> 3 dayNot laserable
-
Cdionne58
> 3 dayLes mesures sur le descriptif ne sont pas bonnes. Cest plutôt 190x290x1.25 mm (7.5x11.44x.05). La pélicule de couleur est environ 0.1mm.
-
Kevin
> 3 daythey were ok
Can the laser engraving machine choose ordinary ABS double color sheets?
For laser engraving equipment, the first choice should be a laser special ABS double color sheet. The cost of laser ABS double color sheets is relatively high, so many users will choose ordinary ABS double color sheets directly.
I can tell you: engraving ordinary ABS double color sheets with laser engraving equipment are feasible, but this requires the operator to have rich operating experience. Otherwise, it will not come.
If you have no experience, the most likely problems will be manifested in the following four aspects:
- Discoloration of the epidermis appears when carving;
- Discoloration of the background color;
- The engraved text appears curling;
- Adhesion will occur when cutting.
