











1/2-Inch Drive Aluminum Socket Organizer | Professional Quality Socket Holder (Red) | by Olsa Tools
-
Mango
> 3 dayI bought these socket organizers to finally get my Craftsman socket set out of the plastic molded case because they would frequently fall out of their spots inside the case, so I would have to spend several minutes putting them back. I use red for SAE, blue for metric, and black for extensions, etc. There are holes in the ends of the rails so you can screw them to a backing plate, or the inside of a drawer, etc. The rubber end caps slide off easily, which is by design, so you can swap out sockets, or add/remove sockets. If you prefer the sockets be locked onto the rails you can make sure the bolt head you use to attach them sticks above the clips and acts as a stop. Alternatively, you could just bend the rails at the ends to lock the sockets on, but I wouldnt do that because it would be too permanent. You can order extra clips, rails, and end caps, so you can cut rails into smaller rails and make custom holders. The clips are great and hold the sockets on well. I had a problem with my order and contacted the seller through Amazon. Mark from Olsa Tools got back to me right away and resolved the issue immediately. Five stars all around.
-
Steve Packard
> 3 dayUsing this for 1/2 inch deep well impact sockets and it still works great.
-
Sven
Greater than one weekI bought two 3 packs (1/4, 3/8 and 1/2 inch) to replace the plastic case that my 40 year old Craftsman Mechanics socket set came in. Every time I opened the case all the sockets fell out and after a while I just stopped organizing. Now I use one set for my metric sockets and one on my standard sockets. The ball bearings on each socket slot is just like that of a socket wrench. They never fall off and make organizing super easy. I highly recommend these! My 40 year old Craftsman set will now last another 40 years!
-
Ford Aufderhar
08-06-2025Order: 2x Red 3 pack for my SAE sockets. Color: Fantastic, bright (definitely not pinkish). Bar: Very sturdy and sockets retention is strong My biggest complaint is I feel ripped off on the clips. You can order a single bar or a 3 bar set, but both options only include half the number of clips each bar has capacity for. As you can see from my picture for example the 1/4” bar will hold 36 clips pretty easily. You can buy clips separately from OSLO but they are quite costly. So why does each tray comes with roughly 1/2 the amount they can hold? These clips are very inexpensive to manufacture, very inexpensive. Including so few clips is a major disadvantage for those of us who have larger tool sets. I have +60 sockets for each size so it’s either pay for extra clips or buy another 3 piece set, which I ended up doing. Love the product, hate the price and package combination options. $13 for single bar with a few clips, $12 for just a few clips, or $26 for 3 bars with a few clips each. Touch choice for me and even if you bought a small socket set, which usually includes it’s own organizer. At the end of the day I’m very happy with the look and very impressed by the quality. If I didn’t know for a fact that those clips cost less than $0.30 each to manufacture I’d flip over backwards for this product. Unfortunately the seller’s choice in grouping/packaging the items leaves me feeling much less excited about the purchase.
-
Agnes Murray V
Greater than one weekWould be nice if these were magnetic. Not sure if it because of the weight of my socket set but they always tip over in my drawer
-
Jason M.
> 3 dayBest socket holder set I have ever owned! I love that you can easily remove either of the rubber ends and slide off the individual socket holders so you can customize to match your set if you have a mixed socket set. They have a slot for optional wall mount but I chose to keep them in the drawers. Highly recommend to anyone looking to clean up and organize their sets!
-
thomas
> 3 dayThese socket holders are a fantastic deal for the money. I checked out some at Lowe’s and the ones they had were $22 each and just cheaply made, the others were even higher and just overkill. These are solid, well built, the socket holders slide smoothly and it hold more sockets. I got the locking caps separately to hold the sockets on better than the rubber end piece. I bought red for “standard” and blue for “metric”, highly recommend and would buy again.
-
Adam Van Wagenen
> 3 dayThe materials and construction are great!
-
Snuggie
> 3 dayI had some pvc ones but after putting yours to the test pvc are just a good 2nd choice.
-
JPlunk
> 3 dayI’m not a professional, but I have good quality tools for DIY projects. I’d been using another well known brand name socket organizer, but after several years of use, the clip retention began to fail, and sliding them up/down the bar became difficult & stiff. I decided to try this Olsa 1/2” organizer solely based on reviews, & I’m extremely impressed! Easy, fluid movement of the clips, & the socket retention is phenomenal, holding both shallow & deep sockets very well. Although aluminum, it is rigid & sturdy, & supports the weight of a full set of sockets. I liked it so much I asked for a couple more of the 3pk (1/4, 3/8, 1/2) for Father’s Day!!! The color options are a bonus as I use 1 color for my SAEs, & another color for my Metrics - it helps me organize, & pick up the correct sockets at a glance. Plan to add more sockets in the future, & this Olsa organizer will be my first choice for organization!