2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
JERRY
> 3 dayIt is easy to get it to connect to the router . For the step the extender and router need to be close together. Moved to an outlet roughly halfway between the router and the dead spot. I now have a strong signal .
-
FBIncognito
Greater than one weekSauber verabietet und funktionieren. Optisch sehr ansprechend und die schwarze Lasche am Clip ist sehr sinnvoll. Endlich verhaken sich die Plastiknasen nicht an anderen Kabeln und brechen somit nicht so leicht ab.
-
Constanze Grote
> 3 dayfunktioniert
-
MARGARET
> 3 dayPlugged it in,presed the button and worked 100%. Can highly recommend this product for use in the home. Bit expensive but worth every penny.
-
ALBERT
> 3 dayExcellent product. Super easy to set up, and cleared up dead zones in our house.House is about 2500 sq ft. I would highly recommend this product!!
-
SANDRA
> 3 dayExcellent product...has extended my wifi signal through the house which has thick, insulated walls...very happy with this product.
-
JERRY
> 3 dayGood Product , Easy configuration & make sure you are close to the main router box as this help you in a faster configuration with less delay signal time .
-
KEITH
10-06-2025It was simple enough to install, and Wi-Fi on the other side of my house is now just as strong as around the router. Awesome.
-
JERRY
Greater than one weekI have bought 3 of these for our office to extend the range of our WI-FI through our whole area. I have had very good luck with these, they are very easy to setup. I have at least tripled the Wi-Fi coverage here for a whopping $90.00. Id recommend.
-
SANDRA
> 3 dayThe entire process took about 10 to 15 minutes.The Extender has an integrated power plug so you dont have to worry about power adapters or where to store the device when it is in use. It just plugs into the wall and is out of the way.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
