2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
REBECCA
> 3 dayI bought this product for a couple reasons. I have an area of my house that we all struggled to find a signal for the wifi. Unfortunately, this was my family room where we spent most of our time. I was hoping to extend my wifi signal and be able to have the same performance in my family room as I have in the room where my router and modem are.
-
MARY
> 3 dayWorks great and solves the problem of range in a two story house.Works great and solves the problem of range in a two story house.
-
ALBERT
> 3 dayHelped to extend wi-fi range to my upstairs rooms with wireless router downstairs. Set up was a little confusing but got it set up in about 30 minutes. Happy so far.
-
CHRISTINE
> 3 dayworks like a dream!! my kids were forever complaining about the Wi-Fi in their rooms. figured id give this a try. what a difference this little guy made! 4 bars in their rooms, and no more complaints!! Highly recommended!
-
sheron windsor
> 3 dayworked well in a 3 bed 2 story home to extend wifi from 1st floor up to the 2nd floor.So far, so good. It certainly extends the signal throught the house.
-
Rein
> 3 daySehr gut!
-
MARGARET
Greater than one weekIt works good in my detached garage about 35 feet from the router in the house.The gadget as described and works good ,would purchase again.
-
Jannis Schwarz
> 3 dayDas Kabel macht keine Probleme und 10 Meter sind in den allermeisten Fällen ausreichend, ist auch recht dick und damit robust.
-
Swen P.
Greater than one weekDie Preis-/ Leistung und Qualtität sind klasse, daher kann ich das Lan-Kabel nur empfehlen und nichts negatives mitteilen. Würde ihn wieder kaufen
-
qttggw
Greater than one weekRouter is located in the basement. Had very poor signal with no internet connection on 2nd floor of the house. This fixed the problem perfectly! Easy set up. Great signal.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
