2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
PATRICIA
Greater than one weekDealt with crappy WiFi for a few years now, Finally got to a point of trying something. Put in one of these and wow now I got WiFi on the other end of the house reliably. Easy to install if you read the directions. Performance is best in my house.
-
Adam F.
> 3 dayIch kann nichts negatives zu diesem Kabel sagen. Es macht was es soll. Von diesem hab ich noch eins gekauft weil es gut ist. Klare Kaufempfehlung.
-
ALBERT
Greater than one weekPretty easy enough to setup. Could be more intuitive but not too bad...just take a bit of focus.Like the flexibility of using wifi or cat 5 cable to connect. Great item - did a great job at creating a secondary wifi signal. I was hoping it would help strengthen the existing signal but this works as great.
-
KIMBERLY
> 3 daySon was having Wifi problems in his room. we live in a small apartment, but his room is in a back corner and signal was weak or slow. It was easy for him to set up
-
JEREMY
> 3 dayOrdered this product and started using in my house about a week ago. Setup was fairly easy and straightforward. Has worked as its supposed to so far. Would purchase again if needed to extend coverage to more of my house.
-
MARY
> 3 dayTook like 30 seconds to configure, I wanted a bridge for my BlueRay player worked perfectlyWorking great after having for 2 weeks. Full signal throughout my house.
-
BENJAMIN
Greater than one weekSetup was easy and the unit has worked flawlessly over the past few weeks. No complaints here!Easy set up (w/YouTube vid) took maybe 5 min, works great at a great value.
-
Steffen
> 3 dayGutes Kabel mit guter Übertragung.
-
Ekim
> 3 dayArtikel wie beschrieben: Schönes Design und 10 Meter langer Kabel. Funktioniert. Was soll man hier überhaupt falsch machen können? :D
-
China Buffet
> 3 dayVery easy setup, even despite my router not having the WPS button. Its been running smoothly ever since and we now happily have wifi out on our backyard patio (device located safely indoors of course).
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
