2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
Otto
Greater than one weekKein ware erhalten ,nie wieder obwohl der Preis war vollkommen super ,Kein ware erhalten ,nie wieder obwohl der Preis war vollkommen super
-
PATRICIA
> 3 dayWere in a 3600 sq.ft. mid-century, well-built home with spotty Wi-Fi coverage. Even with a previous extender in place, my Wi-Fi would drop upstairs several times a day. After I got this one up & running, its worked like a charm!I do want to say I had a bit of trouble with the installation but I called seller for help & they were EXCELLENT. They didnt let me off the phone until everything was operable.Great price...great product!
-
`*~*~_alex_~*~*´
> 3 dayEinfaches aber gutes und preiswertes Lankabel.
-
MARY
> 3 dayo I have a dead spot in the basement of my house. There were multiple options to try and remedy this (including ethernet over powerline, a long cord, or a second router), but this was a cheap and easily set up repeater. Set up is very easy. Plugging it into the outlet turns it on and you can connect to the wifi SSID and then open your captive browser page to modify the settings. When you connect to your home network, it will then piggy back off your home router and broadcast a new SSID.I place this repeater at a spot I had 2-3 bars of wifi reception (on my phone). Now areas where I was not able to get reception, Im getting 4 bars from the repeater (about 2-3 bars from the home router if you consider the chain). this easily extended my range about 30-40 ft including through multiple walls. This is great as I have a few devices that I wanted to use as headless servers int eh basement to keep them out of the way.I also like how this only uses a single outlet without blocking the second outlet (the plug can be rotated by pushing down on the tab). Ethernet is a nice addition, but being a repeater was the main purpose of this device.In terms of usage as a router. Here are the different scenarios for usage:1) Connect directly to the internet through the ethernet and function as a WAN for 5 devices.2) Be a repeater by connected to a wireless internet and rebroadcast the same SSID. This essentially extends the range of your original wireless network.3) Connect to the internet through wifi, but broadcast a separate SSID. This allows you to let people connect to your wireless network using a guest SSID and password without allowing them to connect to your actual router/modem.Please note that i was provided a review sample.
-
JERRY
> 3 dayDid exactly as specified, extended our routers range by at least another 50 feet as it now reaches my shop. No slow down in speed either. Highly recommended!
-
Snoopy28
> 3 dayIch habe den Internet Anbieter gewechselt und brauchte ein längeres Kabel, um den Fernseher zu betreiben.
-
PATRICIA
> 3 daySo far so good. Had real problems with getting a signal upstairs, but this is a game changer. Full 4-5 bars everywhere. Some people are reporting slow speeds to their existing wifi or half speeds using this device - this has not been our experience. We did have an issue that we easily remedied. My son moved the extender to a new outlet and after that for some reason it would not accept the password. So, we just did a quick hard reset. To do this, it must have power (we learned this the hard way). You need a paper clip to do it. Just keep it powered up, and with paper clip press the reset button on bottom of unit, holding it for 8-10 seconds. Then, making sure you are on the new TPLINK network, go to tplinkrepeater.net and just reset it. Will keep you posted if this is a recurring problem.
-
SANDRA
> 3 dayeasy to set up, i have a big house, its a 3 floors and each floor is 270 square meter, a lots of concrete and isolations, i fixed one on the ground floor and one on the upper floor, and the router on middle floor, i couldnt believe the result, coverage even outside of the house
-
JERRY
> 3 dayGood probuct has the ethernet pirt that i use with an ethernet splitter to system link xboxesThis is a very good product. I was really surprise at how great it worked.
-
JERRY
> 3 dayTried other types of range extenders but non worked. These are pretty easy to install and work great. Have now purchased 6 for two houses and office. Worked like a charm!!!! We had a dead spot over our garage in the bonus room and now the signal in there is stronger than in the entire house!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
