2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
ALBERT
> 3 dayIt took 2 minutes to set up and I went from 0-1 bar to 5 bars on my second floor. Very small and easy to use..
-
Dr. Jeramie Bednar DVM
> 3 dayEin Kabel das tut was es soll. Als Ersatz gekauft, gerne wieder.
-
Ciara Konopelski
> 3 dayAlles prima.
-
Bernd George
> 3 dayich bin mit dem kabel sehr zufriden.
-
ALBERT
13-06-2025After 2 delivery attempts I finally received it on my 3rd try. This wifi extender works with my fios router and depends on the number of walls you are trying to extend the signal. Distance from the router is 13ft(first wall), 7ft(second wall), 5ft(3rd wall where the wifi extender is located at [red router light which is expected]. Wifi extender is 25ft away from the Verizon Fios modem with my living room laptop 32.5ft away trying to receive signal from the Fios modem through 4 walls with one of them being 2ft thick.Wifi extender is passing signals through a 2 ft thick wall through the the last wall which is 7.5ft to the last wall. There was no way my my devices in the living room area was going to get wifi signal through 4 walls from the Verizon Fios modem. Sadly Im only getting 10-11Mbps up and down speed in this config due to the 2ft thick wall.
-
Bernhard
15-06-2025Hatte erst Bedenken ob man mit diesem Kabel über 15 m Videosignale übertragen kann. Ergebnis: Keine Probleme, keine Störsignale beobachtet. Ich bin voll zufrieden.
-
Marcla2012
> 3 dayDieses Kabel erfüllt auch bei 10m Länge seine Aufgabe ohne Qualitätsverlust! Dazu passt auch noch der Preis was will man mehr!
-
BENJAMIN
> 3 dayEasy to configure and install . Covers a wide area away from the main router . Excellent signal strengthThis made an amazing difference in wireless range in my old house. Highly recommend.
-
PATRICIA
> 3 dayVery good product, after several months of use, no issue. Coverage is very wide, and signal very strong. You might need to try it at several location till get the best signal coverage.
-
SANDRA
> 3 daySo far so good. However, it has to within view (straight) of the unit you are trying to amplify.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
