Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)

nul tro casse couille accroche tro et pas adapter a ANYCUBIC Photon Mono 4K Imprimante 3D désoler

Ive been using the Anycubic ABS-like to do some bigger prints that I wanted to make sure werent brittle and would be a little more sturdy (think props for costumes). Its working really well so far. I have had to adjust my settings a little bit from my regular resin, but a little trial and error with something new isnt unexpected. On my Mars 3 pro, Im doing some heavier prints, so I increased exposure on bottom layers and on all other layers by a bit, also using beefier supports--parts of my test print stuck to the FEP, so wanted to avoid that. Later prints with updated settings have been working well.

Excelente calidad, se puede imprimir figuras con gran detalle, tiene gran resistencia y fuerza en las piezas. facil maneno para cualquier marca de impresora a resina

This is clearly listed as a resin for mono printers and are optimized and created especially for those types of printers with up to 3 second exposures. Not older machines with standard exposure times of up to 18 seconds. Beware.

My first time using ABS like resin and it makes me like my Elgoo printer even more! Look for a comparable resin chart for your model and also double check the color of the resin as well because sometimes that affects the settings. As this was white resin it had slightly different settings than clear or black.

First let me give you a couple of the particulars. Ive been printing for 2 years and this resin was used on an Elegoo Jupiter printer. The resulting print was washed in IPA, then cured in direct sunlight. I printed it solid, with no drain holes and the picture you see is before curing but after washing. All that being said, the resin performed well. Bed adhesion was good, details were not lost, and the finished product was a solid, strong print. I found it a bit tackier, even after washing, than most other resins Ive used but that does not affect the print at all. Once cured, the print was no longer tacky. My only complaint about this resin at all is that the fumes were much stronger than regular resins, water washable resins, or plant-based resins. It was so strong that it permeated my family room, on the opposite end of our large house. I wore a mask to enter the printer room, but I could still smell it. The Jupiter came with a built-in air purifier but that did not even put a dent in the smell. If you have a separate printer shop or are venting to the outside, you shouldnt have a problem with this, but for anyone else, the smell causes problems. Make sure to wear your protective gear. Aside from that, youll get good prints out of this.

This stuff prints so nicely. I used default print settings for my AnyCubic Photon S and had no problems at all. I think it even printed better than the sample resin I received with the printer. I am not sure if you can tell from my photo but the flat base of part is not only smooth but it has a gloss like quality to it. The cage portions of the print and the internal letter structure have an almost satin look. The finished product is farily flexible but still breaks if you go to far. Definitely more flexible than other resins I have used but I wouldn’t go so far as to call this a flexible resin. I would say it has about the same flexibility as ABS which is no surprise since this is ABS like resin. Post processing was simple. Quick wash in IPA followed by drying followed by UV cure. It isn’t the cheapest resin available but the $25 price tag is not terrible for a resin that is so easy to use. I highly recommend and will buy more in the future.

This resin very, very strong but it must be used in very well ventilated areas because it smells terrible while printing. Also, be aware that printers with exposure times up to 18 seconds are not recommended. Only use this if your printer is optimized for up to 3 second exposures. Even with the smell I would still recommend this resin.

shatters really easy, prints smash like glass, tryed on many thikness and models, same results! buy cheeper non abs like for better results

I found this to be nothing like ABS. very very brittle. I print for film and TV and i would never use this again. I see someone else from the UK having same problem...it could be temperature sensitive as its been cold here for months.