Brother Sewing and Embroidery Bobbins 10-Pack, SA156,Clear

I have a brother project runway sewing machine and theses work just fine in my machine.

Got these for my Brother machine. The quality it great.

I have learned in my sewing classes to have at least three bobbins ready to go for each project. It seems like the thread always runs out when you least expect it. These are the bobbins specific to my Brother model and so far they have stood up to multiple sewing projects with no problems.

These fit my brother xl5600 perfect. I want metal ones but always read that half are unusable and bent. With these, all are usable. Almost the same price as Joann, but a tiny bit cheaper. Authentic.

They worked well in my brother machine. I Bought a few packs.

These are the bobbins recommended for my new Brother XR1355 sewing machine and theyve worked perfectly in it. Brother also sells these same bobbins with clips to keep the loose thread ends contained but you cant just buy the clips by themselves — thats unfortunate. Poking around on the Internet though, I saw a suggestion to take clear plastic tubing with an inside diameter of ½ and slice it into rings thin enough to fit between the sides of the bobbin. Make a single slice through one side of a ring and wrap that now curved strip of plastic around the thread on the bobbin — works great! (and its cheap!) I need cheap to compensate for the nametag premium these carry. These are genuine Brother SA156 bobbins and you pay a premium for that genuine adjective. I have purchased other, less expensive bobbins that are supposedly just like these Brother bobbins but have not had very good luck with the knock-offs. Some of them have produced tension problems or skipped stitches but others seem to work OK. Its a real crap shoot. Im tight with a buck but its not saving anything to buy something less expensive if it doesnt work properly. Comparing these to some of the substitutes Ive noticed a few things. 1. These tend to feel and look higher quality than the knock-offs. The plastic has a slight bluish tint to it but it is clear and generally flawless — the mold marks are not very obvious. The substitutes are usually colorless, feel thinner, and often have noticeable molding flaws. 2. The genuine article has a number on the center cylinder or hub when looked at from the side — possibly identifying the date or location where it was made — theres no obvious reason for it to be there. The knock-offs may have numbers in other places but I did not see any on the hub on any of the ones I purchased. 3. Looking down through the hole in the center of the bobbin, there is a notch on one side of the opening — both top and bottom. The notches line up — theyre located in the same vertical line through the bobbin. The knock-offs have the notches located on opposite sides of the center hole. If one is on the lefthand side looking down at the top, if you feel underneath the other will be on the righthand side — with the genuine bobbins theyd both be on the same side of the opening. 4. At first glance, the bobbins appear to have 4 holes to push the first bit of thread through when winding the bobbin — two on the top and two on the bottom. Closer inspection of the genuine bobbins show that each side has only one hole, not two. The second mark looks very much like a hole but it does not penetrate the side of the bobbin. The holes, like the notches, are located directly above and below each other. The knock-offs often actually have two holes on each side — one larger than the other. The larger holes come close to the size in the genuine bobbin but, like the notches on the knock-offs, are located diagonally on each side. Someone in China apparently decided providing a similar appearance was good enough — function wasnt important. I hate paying a premium price for something as inexpensive to produce as plastic bobbins but that seems to be the only way to guarantee theyll perform properly. Ive just run across another website called SewingPartsOnline dot Com which guarantees that their generic equivalents of genuine parts will perform as well. Im going to try ordering some of their SA156-equivalent bobbins and will try to remember to come back here and update this review with the results.

I have a Brother project runway CE1100prw which a friend gifted to me after she found sewing was not her thing haha. Sadly she had lost all the bobbins so I went down to the sewing store and they gave me the wrong dang bobbins (not these). I used them for quite awhile and though they got projects done they were always wobbling and noisy, and knotted the thread on occasion. I thought I just didnt have a great sewing machine. Then came the day I decided to buy some more and found out I was using the wrong ones! And in ships these. They seem to be very good quality, and work well. Wound thread nicely, and fits/works perfectly in my sewing machine. Its like I bought a new one! Very glad I decided to get these

Their bobbins, what can I say. They work.

This is the second time I am ordering. They fit my Brother machine are sturdy and would purchase again.

Reparaciones en casa