Camco Aluminum Anode Rod- Extends the Life of Water Heaters by Attracting Corrosive Elements, Tank Corrosion Protection (11563), Silver

(1603 Reviews)

Price
$16.29

Quantity
(10000 available )

Total Price
Share
100 Ratings
70
25
3
1
1
Reviews
  • HenryR

    > 24 hour

    Hard to say much about an anode, heck, it is an anode. This fits and is the recommended model for my SW10DE. I must be lucky with water sources and I can go as long as 4 years with only about a 50% deterioration rate. When they do get to about 50% I replace the anode. I keep two spares as you never know when you or a buddy or neighbor will need one. There is no O-ring for these. I use sealant paste or tape, depends on what I have in the tool box that is easy to get to. Just make sure you check your thread diameter. Suburban heaters are 3/4 and the Atwoods tend to be 1/2.

  • peter maher

    > 24 hour

    Fit as it is ment to be

  • Gilberto Pfannerstill

    > 24 hour

    Great product. Perfect fit for the Water Heater in our Camper

  • Richard

    > 24 hour

    I have an Atwood 6 gal LP hot water heater. The tank is aluminum and originally Atwood only installed a drain tap rather than an anode. As an industrial maintenance tech I thought installing an anode would be an good measure to increase the life of the hot water heater tank. The anode is doing the job well. The sacrificial metal is doing what is should do. As I drained the hot water tank for winterization Nov 2018, I got a first hand look at the condition of the rod that was installed Feb, 2018. Its doing what it is designed to do, sacrifice itself to protect the tank.

  • A. Brown

    > 24 hour

    Im giving it 4 stars because there is nothing wrong with the rod but it did not fit my Suburban 8 gallon tank. The threads were too long, 3/4 of an inch. Id previously bought a Camco rod that fit my tank, the threads were 1/2 inch long so must have been a different part number. So just make sure you have the right rod. See the picture of the old rod and the 11563 rod.

  • Suzanne B.

    > 24 hour

    Super easy to install, just used a 22mm wrench. This is the second time Ive purchased, cheap way to protect my rv water heater.

  • Efrain Bergnaum

    > 24 hour

    This was exactly what I needed for the WH in my Fleetwood Pioneer camper. I was unsure of the size I needed, but this fit perfectly.

  • Paul McCutchen

    > 24 hour

    So far this is working in my hot water tank on my camper

  • Jesse

    > 24 hour

    Was told we would need to replace the one that came with our new to us RV and the store wanted over 2x what this one costs. Would recommend.

  • William Petrino

    > 24 hour

    East to install saves hundreds of $ verses calcium build up in tang . will keep build up off of the tank allowing proper heating of water.

Camco RV Aluminum Anode Rod extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion. This Anode Rod fits Suburban and Mor-Flo water heaters.

Related products

Shop
( 3120 Reviews )
Top Selling Products