Creality Official 5pcs MK-HF Nozzle with 2pcs Sprite Extruder Silicone Sock, Copper Alloy Nozzles for Ender 3/V2/Pro/Max/Ender 3 S1/Pro/Plus/Neo Series/Ender 5 Series/Ender 6/CR-6/CR-10/Sermoon D1/V1

Perfect replacement for my original parts. Highly recommend these replacement parts.

Bought to add onto my Ender 3 Pro. Easily attaches the CR touch with its built-in mount. I added an additional z axis motor to help with the extra weight. The direct feed is so much better, but it does require some changes to your print program. It was also a pain to setup with the Creality Sonic Pad but once I got it all working its been very consistent.

I recently purchased an extruder heater block kit for my 3D printer and I am extremely satisfied with my purchase. The kit came with everything I needed to upgrade my printers extruder to handle high-temperature filaments, including a stainless steel heat break, brass nozzle, and a heat block kit. The installation was straightforward and easy, thanks to the clear instructions provided. Once installed, I immediately noticed an improvement in the quality of my prints, especially when using materials that require higher temperatures. The extruder was able to maintain a consistent temperature throughout the print, resulting in smoother and more accurate prints. I also appreciate the durability and quality of the materials used in this kit. The stainless steel heat break and brass nozzle feel solid and well-made, and I am confident they will last for a long time. Overall, I highly recommend this extruder heater block kit to anyone looking to upgrade their 3D printer. Its a worthwhile investment that will improve the performance and versatility of your printer.

When you want the best 3D printing results you must go with a bi-metal heat break. It really does make all the difference when printing at high temperature like for ABS, PETG or nylon. It is also really good for the lower temperature filaments like PLA as well to give a much more stable temperature at the nozzle. I have done some test prints and of course the boat, and the results are better than I ever expected. This is a true drop in upgrade with no additional modifications needed. After installing, just need to run though the leveling setup and you are back on track to super smooth prints on all temperature ranges. Highly recommend this upgrade even if you dont plan on printing with ABS or PETG you wont be disappointed at all.

I’m still getting the hang of this thing, it seems to be working fine now BUT, I wanted to warn people about following Creality’s instructions. I printed the BLTouch bracket - per the instructions, & the probe was too short. When I tried to home it, the hot end smushed into the bed HARD. This happened several times & had me wasting a ton of time looking at my wiring to fix the problem. I had to intentionally crash it into the bed AGAIN to confirm my suspicion. In short, the stupid bracket that Creality tells you to use with the BLTouch is NOT NEEDED.

Arrived fast, didnt have any issues. Worked fine how it was shipped, but Ive since replaced the throat tube with a Copper + Titanium one because at the time, the titanium only throat tube was the only option. I did this out of personal preference, not out of necessity. I still use the stock Sprite Cooling set up right now, as I havent done much higher temp printing yet, but I have no doubts that this unit should perform well for higher temp printing. The nozzle that came with it works fine, but I did need to tighten it once I got the whole unit installed and heated up (while PID tuning). I have close to 100 hours print time with this unit and its nozzle installed without issues so far. If you are considering upgrading/replacing your Heat Block with a kit like this, just remember: 1- Be careful of the Thermistor and Heat Cartridge wires. 2- Be sure to tune your PID with the Silicone On 3- Make sure to heat the unit up and tighten the nozzle. 4- Readjust your Z offset. You may need to adjust your flow settings too, but I didnt have to.

Nice set of nozzles for the sprite drive.

If you use a Creality Sprite extruder, this is an all metal hot end ( an upgrade for some models ), capable of heating up to 300C and handling engineering grade filaments. I broke a thermistor wire on my Sprite hot end ( Ender 3 S1 Pro ) and decided to replace the entire hot end. As expected (its an authentic Creality part and the store is a Creality reseller ) it dropped right in to my Ender 3 S1 Pro which already had a 300C capable hot end and worked just like the original.

I have quite of printers that have the sprite pro on them and all have the same nozzle. This kit makes it to be able for me to change the tip. There are different sizes and have not printed other than the .4 This ranges from .25 upto .8 and looking at the hole the .8 is huge. I have not used them before and now opens the door to other options. Since this is steel the hotend will have the option with other upgrades to have the ability to print hotter too. Glass hot. Dont think so but other things. Got 2 new socks incase 1 rips or something. It will keep the temp there and not cause a fault because its missing. Well extra ends is always nice to have. Hope you have Good Luck printing and get these nozzles where they done cost that much.

After spools and spools of filament that hove gone though your existing nozzle its time to change it out for a new one. Either because of a clog or its just not producing the high quality prints as it once did these official Creality copper with nickel coating makes all the difference. It comes with various sizes and each one is perfectly machined to its specifications. The kit also comes with two silicon socks to put around the hotend to keep the temperature constant as well as to protect the nozzle from stray filaments getting on the hotend. When you need the best replacement nozzle then this is the one to get. Highly recommend these as that really do make a world of difference when printing.