ELEGOO Mercury Plus 2 in 1 3D Printing Wash and Cure Station V2 for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models

Its a lot better than any home made set-up. Washes the prints well and 10 mins on the rotating stand and the prints are hardened all over. Very easy to use and would definitely recommend it to anyone that 3D prints with resin printers.

Cleaning and curing the print after its been printed is something you have to do after each print. It is a chore and my least favorite thing about the 3D printing hobby (maybe behind taking off the supports). If I didnt purchase this machine I would not have printed as much as I do. It makes the workflow of 3D printing so much more enjoyable. Print is done, take it off the plate and throw it in the basket. While its cleaning your print for you, refill the reservoir and start the next print. Once its done cleaning, take the print off the supports and cure. If you are burned out on 3D printing and dont own one, this may revitalize your desire to print because it takes cleaning and curing the prints out of your hands.

The first unit worked for about 3 days, and it was great while it worked, but stopped powering on. The replacement unit didnt power on out of the box. I would not recommend this unit, you cannot trust the longevity of the product.

After a little bit after a year and hardly any use the wash function of the machine doesnt work.

Im new to SLA printing. But I have used FDM before so Im not totally stranger to how it works. But when it came. To the extensive cleaning instructions on how to cure SLA prints. I was immediately discouraged, but I saw this in a review on YouTube. Once I got it, it was a synch to set up, dont need instructions. Turntable and wash container attach to the base magnetically. Very quick and easy to switch them out when needed The controls couldnt be simpler, start stop, add 30 seconds, minus 30 seconds, and switch between clean and cure. Function is very simple and easy, I usually would take my prints and set them in the metal basket then into the container. I set an average time of 3 minutes wash. The machine will switch direction halfway through to get all the excess resin off. Then for curing, I would removed the container from station and put the turntable for curing, set my washed pieces on and WAIT until all of the alcohol from wash is gone. Then switch to cure mode (if you dont it will spin so fast it will most likely break your print). Then an average of 3-5 minutes of cure, viola your piece is done. Flip the switch and its turn off.

I got this at the same time I got my first resin printer. I saw some reviews that said its washing function does a better job than any ultrasonic bath. Ive never used any other washing method but I can say that a 30 second spin cycle in 2000 ml of denatured alcohol gets my prints squeaky clean for sure! Now, about the UV curing function, Im sure its just as good as any DIY curing system, but the fact that its a 2-in-1 machine makes the work flow so much easier in my opinion. My only complaint is that I wish I could make the curing platform rotate faster so that I can have my prints cured all around but with less exposure time. Sometimes they get over exposed even after just a 30 second cycle. Although, the over-exposure problem seems to have gone away since I upgraded my printer from a Photon Zero to a Photon Mono. Overall, Id recommend this to everyone, its just so convenient!

For the price it does what it is built for. Happy with purchase. No complaints.

The basket is not even the same, the washing lid is missing and the whole assembly is covered in crud and gunk some parts are still sticky. I didnt select to buy a pre-owned model I was buying a new one. So why did I get a pre-owned one with different parts and missing parts?

Lo amo me encanta un cambio bien grande con esta máquina

I used to use separate containers and a paint brush to clean prints, now into the tank and clean remove and cure.