Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Nicholas Babcock
> 3 dayHas been cooling my build for a while and it is doing well. Although it only has one of the 2 fans attached due to the fan not able to clear the ram on one side and the mother board itself on the other. The second fan is about a 10% difference in temp.
-
Ara Gulgowski
> 3 daycame quickly and what a piece of kit. i researched it first and it is pretty much the best air cooler out there. it was incredibly easy to install and is absolutely brilliant. one thing i would say is make sure you check the dimensions of your case, as this is a beast and will need a pretty big case to fit it in - however if it will fit, snap one up - and i would recommend buying from here as youll get it in no time.
-
Miha
> 3 dayI have amd ryzen 3800x and bought this cpu cooler so I would have the most silent pc possible. It does the job:
-
EvoCyberNation
> 3 dayOk... This wasnt a fun adventure, putting in the fan while in the case, but it puts less stress on the mobo. Once you have the front panel and back panel of the case removed, you place the bracket from the outside going on. Once thats done put your spacers on, and then take the screws and tighten the the bracket into place. Now reinsert the back panel and tighten those screws up.
-
Vernon Radford
> 3 dayGot if for a mini itx build and ot works great dropped my idle temperature from 58 to 37-48. Easy to install just amke sure you plug everything up before this.
-
Spike Spiegel
> 3 dayepic air cooler; quiet and extremely high performance! Mid 25C idle temps on a slightly overclocked 6700k i7 at 4.5ghz.
-
D. Matheny
> 3 dayWhen I ordered this, I assumed that the basic operation of the LGA2011 and LGA2011-3 would use a back-plate similar to everything else Intel has done for the last decade or so - but that turned out to be wrong.
-
Ken
> 3 dayIt has amazing cooler performance but it is huge. The outside fan is so large that it will not fit in my large Antec case because it hits my RAM below and the case side.
-
Leigh
> 3 dayMy god this thing is massive
-
MARK
> 3 dayEcezzionale!!!!!!!!! lo so, costa forse pò caro ma già limballo e la confezione ti dice che hai comperato un prodotto ad un livello veramente alto.
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
Related products
