Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
James
> 3 dayLarge but one of the best air-coolers out there. I used mine to replace a Cooler Master Hyper 212 EVO. The Noctua has reduced my CPU temp by several degrees under load (gaming). Colour scheme isnt something Id have choosen, and its a shame you cant get this with black fans. Its very large, so youll want to check that your case can accomodate it. Now if only my case didnt have a window on the side...
-
Michael Nat
> 3 dayI have an Intel i7-10700K fit inside a Phanteks p600s case. The NH-D15 is a close fit, but a fit none the less. Never had any issues with temperature control in the past two years.
-
callmeflea
> 3 dayCools my i7 7700k adequately (26-31oC idle, 45-50oC load, stock speeds). This does fit in a Cooler Master Masterbox 5 case and with the Asus Z-170A motherboard. The caveat is that you can only use the center fan, as additional A15 fans would run into either the RAM on one side or the IO panel on the other. To address this, I replaced the 2nd A15 fan with a 120mm fan.
-
james brown the king
> 3 dayQuiet. Easy install. Runs very cool. It is huge!
-
DeLorean
> 3 dayIm meinem anderen PC ist ein ähnlicher Kühler seit 10 Jahren in Einsatz. Ich hoffe der neue wird wieder so lange seinen Dienst tun.
-
David Kolodzy Schneider
13-06-2025Habe mir diesen CPU Kühler nach langem Überlegen bestellt. Habe ein 8350X und vorher ein Katana4 als CPU Kühler benutzt der nicht schlecht war. Nun nach sehr schnellem Abbau des alten sowie sehr gutem Einbau des neuen CPU Kühler habe ich erstmal gesehen wie groß dieser Noctua nh-d15 ist.
-
sheya
> 3 dayAvevo un sistema di raffreddamento a liquido della thermaltake che comportava ogni tanto un minimo di manutenzione dovuta al rabbocco del serbatoio.
-
Khalil Price
> 3 dayExcelente
-
Didhier
> 3 dayAlways heard about how amazing were this cooler.
-
Ciara Hill
> 3 dayA mio parere il Noctua NH-D15 è il miglior dissipatore attualmente, la temperatura della mia cpu non ha mai sfiorato i 30 gradi (che sono già pochi) anche sotto sforzo non li raggiunge. Ottima scelta per overclock, inoltre è silenziosissima!
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
Related products
