Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

(0 Reviews)

Price
$28.99

Quantity
(10000 available )

Total Price
Share
97 Ratings
47
21
12
8
9
Reviews
  • Dock Bode

    > 24 hour

    Needed to rebuild the trailing arms for my 67 Corvair. Air compressor wasnt large enought to handle a sandblaster but I did have a new 3200# PSI pressure washer. Using the cheapest bast media I could buy (medium glass beads) I was surprised of the results. That is 53 years of rust that disappaered in minutes. Anybody want to buy a sandblaster? You should wear coveralls, full face shield. I did my blasting in a corner of my stone drivway so clean up was easy, let media dry and re-rake the stones.

  • Zachariah Stanton MD

    > 24 hour

    When it works for the 2 seconds of every minute you spend getting it to siphon it’s great. Have to have some one forcing the siphon tube to load while spraying or you’ll never get anything done

  • Ryan Gillis

    > 24 hour

    Didn’t work for me, tried everything

  • Brian Fulkerson

    > 24 hour

    Its works ok. Need a slight modification then it works great

  • Rocky Mills

    > 24 hour

    I just received my kit and hope to start using it within the next few days .

  • Norene Kshlerin

    > 24 hour

    We took the sand blaster to a toolbox and were ready to in two days.

  • Paco

    > 24 hour

    Cleaners will not remove paint

  • Rafael

    > 24 hour

    This product is good for small jobs only made a mess and was a lot of work for the out come. Went with the liquid rust remover solved my problem.

  • James Gman$

    > 24 hour

    Well worth it ! Just follow directions and it works great. Im using to strip paint off pontoon boat plus many other jobs. I have a 3100 psi @ 2.9 gpm and it pulls sand great. I use kiln dried sand from home Depot. I did get a very small rock stuck in the tip 3 times, I unscrewed the tip used a small punch to remove it but thats in the sand. I used (1) 40 lb bag in +/-20-minutes continuous blast. I also got extra tips or consumables when I ordered to have on hand. I say yes buy it !

  • donald hatch

    > 24 hour

    Worked great at 1st but takes longer to keep to keep unplugging or it will shoot out a bunch and blast great for 10 seconds followed all directions my pressure washer was 3500 dont think ill use again without modification

tool dailytool daily
Pressure Washer Sandblasting KitPressure Washer Sandblasting Kit

logologo
Tool Daily: The Great Brand for Pressure Washer Accessory

Tool Daily are committed to developing more efficient and safer pressure washer accessory, helping people reducing the tiredness of spraying and cleaning in the garden. We are known for amazing pressure washer accessory, such as nozzle, wand, gun, coupler, foam cannon. We do everything in our power to ensure customer’s full satisfaction with the product quality and service.

SPECIFICATION

Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack".

  • 1. Minimum Flow Rate: 3 GPM
  • 2. Minimum Pressure: 3000 PSI.
  • 3. sand into water system.
  • 4. Max Working Pressure is up to 5000 PSI.
  • 5. 1/4 Inch Quick Connect.
  • 6. Temperature is up to 140°F/60℃.
  • 7. Orifice 3.5.
 Pressure Washer Sandblasting Kit Pressure Washer Sandblasting Kit

Application

Pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.

 Pressure Washer Sandblasting Kit Pressure Washer Sandblasting Kit

How to Set Up

1. Connect 1/4’’ quick connect plug (B) to pressure washer trigger gun or wand.

2. Insert sand wand (C) into media (dry silica sand, baking soda or washed and dried river sand). Please make sure the sand is dry, or it will not work.

3. Turn on the pressure washer. Unlock the trigger gun, then water and sand will come out from permanent nozzle (A). Please make sure the part D is above permanent nozzle (A). If the part D is underneath permanent nozzle (A) as the image shown, the water will go into the hose of sand, wet the sand and then sand will not be sucked up.

4. After work, please dry the cleaned goods as soon as possible, otherwise they will rust again the next day.

Related products

Shop
( 171 Reviews )
Top Selling Products