UNI-T AC Circuit Breaker Finder with Integrated GFCI Outlet Tester AC 90-120V USA Plug + Adjustable Sensitivity Beeper Indicattion+ Flashing LED Light

We just moved into a new home, but discovered the electrical panel was poorly labeled. This tool helped us map all the wall sockets to their appropriate breakers, so we can power down only the outlet we need without affecting others. This is an extremely useful tool to have around.

This device is very easy to use and allowed me to determine a problem with the house wiring in the circuit breaker cabinet. I contacted an electrician and he was able to resolve the problem which could have resulted in damage to appliances and devices plugged into the affected outlets. I dont understand the whole issue but it had something to do with the neutral leads. The symptoms were this device sounded off on multiple breakers for widely separated outlets. The electrician was able to fix the issue fairly quickly and once he finished the device worked flawlessly.

I wish I had one of these a long time ago. It works for me. As long as you understand you need to start out with the receiver on high sensitivity them gradually decrease it to lower sensitivity (go from general to specific to zero in one the exact breaker), you should be fine. The transmitter device seems to be exactly like one I already owned and are sold by themselves. It may just send some kind of signal the receiver detects. If you have an old home with multiple wiring revisions done over the years, this is a kit that will save you a lot of time.

Finds breaker very well but says I have open ground and I got out my tester I know is good and it say they are fine. The tester part is inaccurate

Excelente

So this circuit breaker finder is not bad at all. I tried it a few times in different locations and for the most part it worked for me. Only one instance it didnt work as expected. Very easy to use, nice and compact and comes with a nice carrying case. Overall not a bad product at all.

Works like a charm! Just gotta play with the sensitivity... start low.

Best money spent. This is by far the best tester I have for the low cost. Love the case that it comes with.

Fairly easy to use, plug in the transmitter in the test socket and move the detector over the breakers along a line down the breaker array on the side closest to the panel box wall and not near the panel center line . instructions say to turn the sensitivity all the way down eliminate cross-talk issue but I found a midpoint setting worked better. I would typically start at full sensitivity, sweep the panel to ensure it saw a signal, then step down the sensitivity until only one breaker trigger a response. Note I generally could not distinguish between the a/b breakers in a double gang setup. I did have one issue; the transmitter makes an assessment of the socket and can identify problems with the wiring. This worked initially, but after testing several sockets it consistently indicated an unconnected ground even on circuits it initially said were ok. I verified a good ground with multimeter so bad transmitter. I returned the unit and amazon promptly replaced it . havent had any issues since then.

This breaker finder is So easy to use our use it on so many things even on different floors and it detected with no problem