wisedry 2 x 500 Gram [2.2 lbs] Rechargeable Silica Gel Car Dehumidifier, Microwave Fast Reactivated Desiccant Packets Large for Safes Closet Basement Garage Storage Moisture Absorber Bag Reusable

Your suppose to “weigh” the bag to determine if it needs recharging. And your scale won’t work. Well, if I’d have known/read that more clearly, I would have purchased a product that turns color when it needs recharging.

Works well

Good, but not great. Mine started leaking at a seam. I sewed it up. Now I handle them very carefully.

I tried drying this out in the microwave, following the instructions on the bag (1000W = 2 x 6 minutes), and a hole burned in the bag, causing the silica beads to fall out. So now the product is ruined. Otherwise, it seemed to absorb moisture from my car (prior to the failed attempt to dry out the bag).

Once the packets were full of moisture, I microwaved them for 8 minutes on a microwave-safe plate as directed. I did not notice a large hole had burned through the black casing, so when I removed the plate from the microwave with the packets on it, the burning hot silica beads fell all over me and my stove and floor. They burned my arms and 1 leg where my skin was exposed. (Not blistering burns, but burns that turned red and still hurt an hour later). Thank GOODNESS no child was nearby. I now have a huge mess to cleanup once the silica cools down and my burns no longer hurt too much to go clean up in there.

Helps prevent car windows from fogging up.

I cannot evaluate this product for its efficiency. It and one other,were placed in an sealed container (tote) and is in storage in a climate controlled facility. The box contained machined engine parts. It will remain in storage for at least 6-9 months, so I hope that the contents will be pristine when I remove them from the totes. 2 bags per tote were used, and the totes were locked by the manufacturers locking devices on each end. I will review better when I have a look at the stored components. However, I must say, that the packets were well packaged by the manufacturer and were easy to use. Thanks.

After just about all it’s five minutes. Fist time trying although received about 6 weeks ago because we were not ready to used them. So saved for when we were ready and would like a replacement or refund. It’s a shame we didn’t open and try before the return window. What a freaking mistake. Don’t make it, open and try them right away.

Used in a dry box for 3D printer filament. Working well. Havent quite reached saturation point yet so havent had to dry it yet, but that time is coming soon. Hopefully I dont have microwave issues like a few people have had (though may go for the oven method or try putting it in one of my 3D filament dryers. Will report back if any issues. But so far, its working great.

Works, and recharge / dry process works close to the instructions... But pretty slow to dry the air even when pushed directly into tight space trying to absorb moisture trapped under car carpets.