XiKe 10 Pack Blue 2 Nylon Garage Door Roller 4 Stem, Quiet/Durable and High Load, Use 6200-2RS Double Seals Precision Bearings.

I couple of youtube videos, 20 minutes, and done. Should have checked the sound before i changed the garage door opener. No assembly required.

I replaced 20 year old steel rollers and my garage door is much smoother and almost zero sound. I only hear the garage door motor now! I was able to replace all 10 rollers in less than 10 minutes. YouTube for “ install garage door rollers” for easy step by step directions.

These wheels are really quiet and seem to roll very well in the track.

I just installed these and they were very easy to replace and a lot quieter. I opted to remove my hinges except for the bottoms. I did this so I could clean and lube them. The bottoms I just opened the door up and bent the track out just a hair right buy the track joint, super easy. I also bought these sleeves to go over the stem off of Ebay, I think they helped a lot. Now the only thing I hear is my opener itself. I kind of hope my opener goes out so I can replace it with belt driven one. My garage door and opener is from 2005, anything had to be an improvement.

They work perfectly doors much quieter now, see YouTube for installation help

The wheels are sturdy and the noise reduction is instant after you change out all wheels. I went with removing all the bolts on door for each wheel. It was the easiest without causing any damage to frame or door by using the hammer claw method. When removing the bracket that has the cable attached, I raised the door and removed the cable, changed out and reattached cable. I then changed out all the other wheels with the door closed. I changed both my garage doors and amazed that all the noise and squeaking was from those old wheels.

Great product for the price. Noise level down considerably. Opener seems to be working easier.

Quick delivery and works great

Perfect

Replaced 12 rollers on my garage door and this worked perfectly fine to remove 90% of the noise when the garage door is in motion. Install was a simple process, just required a little YouTube information for best practices on installing the bottom rollers. Otherwise, would have only preferred a white as opposed to blue color - but thats just minor preference that doesnt affect function.