





























ALITOVE 16.4ft 5050 SMD Red LED Flexible Strip Ribbon Light 5M 300 LEDs Waterproof IP65 DC 12V for Home Garden Commercial Area Lighting
-
Jason Long
> 24 hourGreat product. Super bright LEDs and easy to install. I didnt like the adhesive tape that comes on these, as it peeled off when just trying to remove the backing, so I used the 3M auto-adhesive tape and it works great. Installed the lights under the gunnels on my bay boat and looks great!
-
Brandon Mack
> 24 hourVery bright
-
Tom Showalter
> 24 hourThis product seems much better in quality and brightness than others that I bought. I cost a little more, but youll be better off. My last strip failed after just one year because water mist corroded the circuit board very easily.
-
L. Norris
> 24 hourI bought two of these to put one on each side of my pontoon boat. We stuck them to the upper portion of the pontoon and then covered in clear silicon to help waterproof and bond them to the pontoon. So far, they are working great. Do keep in mind though that even though they are LEDs, they pull 60w at 5 amps according to their specs. I had to put mine on their own circuit which worked out well.
-
Matthew Cassell Jr
> 24 hourSo far so good had them on my racecar for about 3 weeks and I haven’t had any problems. You can see video of them @ CRT MOTORSPORTS on YouTube.
-
Lenn H.
> 24 hourThis has the best adhesive to mount. Uses foam adhesive tape is much better than what normally is used.
-
C Loomis
> 24 hourVery fragile. Had to buy a new one because if pulled to hard it will rip apart and can not extend once broken
-
Jacob clark
> 24 hourSuper bright lights.
-
Eric
> 24 hourThese lights worked great I made sure I had a clean surface let the adhesive set in the sun to make it a little more sticky like it advised too put in boat and it lasted for a couple days then fell off the only thing I could suggest is getting some kinda glue or tack and put it about every foot to give it extra strength bc the adhesive alone will not hold
-
Brian
> 24 hourI had no problem installing these lights, the double sided tape adhered well. The only thing I would suggest is to place a small amount of clear silicone on each connection to guarantee placement.