ARB INFLATION3 Twin High Performance Air Compressor CKMTA12 and Extension Hardware for Easy Installation and Connection in a New Printed Box, Ideal for Lockers, Horns, Tire Inflation and Air Tools

Its ARB.... What do you expect? Fit great on the engine cover mount in my JL, wired to my RC ML6 switch bank, and extended the hose. Super happy!

Absolutely needed for all Overlanding adventures. I have taken the ARB system beyond what they recommend and it keeps on giving. I 1000% recommend for all wheelers!

It seems that this was only meant for lockers. Using this to inflate tires appears to be a poorly thought out after thought. There is an over priced tire inflation kit. But you can buy a 1/4 NPT tee and put it the pressure sensor port and then have the air sensor and hose fitting on the tee. Most likely, everyone that buys this is going to need to modify the wiring harness to make it work. Since there are no kits you have to figure out what you need and where to get it. I tested it by dropping one of my 35” tires 10 psi then filling it. It took about a minute to get it back to 36 psi.

I am creating a overlanding hybrid vehicle out of my 2018 Nissan Titan. Finally got this installed took some effort and some help from a friend who is a beast at fabrication at Distinctive Designz was able to get this mounted under the truck tucked right behind the gas tank. Ran hoses for the front and back and filter hoses. It works perfectly and is very convient having my own air for any number of reasons.

This thing is powerful! I was surprised when it arrived and I opened the box. This thing was heavy In a good way tho. Well built with quality parts. It comes with everything need to wire it up and to switch it on. You only need to plumb the air side of it. I mounted on the inside up high on the rear passenger wheel well. On my 2006 gmc sierria. I have it going to a 7 gallon air tank and a 25ft air reel where my Spain tire used to be.

Solid quality ARB product. With the help of YouTube it was an easy install. Be aware I have a 2015 Jeep Wrangler and the two rear mounting screws were too long as the vast majority of Jeep mounts sit right on top of the brake booster. Ended up taking them out. It sits nice and tight with just the two front screws torqued. Wired it to my sPod, no electrical issues and does not draw a ton of power. Fills up tires quickly. I am running 305/70R18s and went from 20 to 38 psi in just under two minutes.

Added this air compressor to my Jeep to be used to inflate my tire after off roding. Works great! UPDATE: 9-18-2022 DISAPPOINTING!!!! Have been using it now for over year to air up the Jeep tires after offloading and it is overheating after airing up each tire from 18 to 34 psi. Been having to wait for the motor to cool and reset in between each tire. Going to look for other alternatives for air before it leaves us stranded with low tire pressure. Glad I dont have air lockers Im using this for.

Ordered this from a warehouse deal as new in original box. Even had the inspection sticker on it from Amazon that it was all there. Parts were missing (air filters, switch, brackets, the instructions, and wire harness was cut and spliced, scratches all over the compressor). Needless to say it wasnt in like new condition and had been Installed and then thrown back in the box. I know its not ARBs fault but come on Amazon, do a thorough inspection before you put it back on the shelf. The person that bought it before me basically stole a bunch of parts and through it back in there. The only reason for three stars is because ARB compressors are great and the product itself deserves five stars.

Easy install to my Jeep Wrangler! ARB

What can I say? It works and provides enough air for my ARB rear locker. I wouldnt expect it to do much more beyond lockers, so it really is a one-trick pony. Other than that, time will tell how reliable it is, but given that it is ARB made, I dont expect issues.