

California Air Tools CAT-AUX10A Lightweight Portable Aluminum Air Tank, 10 Gallon, Silver
-
Craig
> 3 dayWorks great so far. I chose the steel tank but it is still lighter then my pancake compressor. I keep it at 90 which is conservative but my van can get over 120 in the sun. I am going to get a longer hose so I dont even need to take it out of the back.
-
victor l.
Greater than one weekDoes the job intended to do. As portable air tank, the gauges are adequate for the job. The aluminum tank may be preferable over the steel tank when it comes to portability and weight. But I will be using this as an Aux tank for my home compressor so I wont be moving it around.
-
Robert D
> 3 dayvery nice tank, seems very well made, great for the use I intended.
-
Tony Roma
> 3 dayI wish I would have bought this years ago. Ive been lugging around a steel 5 gal one for years. This thing lasts twice as long and is super lite.
-
John
> 3 dayThe tank is very light and seems to be well constructed, but almost all of the fittings leaked (all but 1 of the 6). I spent more time than I would have liked trying to fix all of the leaks. Not a major issue, but all fittings should be checked before the tank is used. Also, the gage is placed in location where it runs into one side of the tee. Your best bet is to reconfigure the fittings/gage so there is limited interference. Because of the interference, the first tank I received had a smashed gage. The packing of the tank in the box was poor at best. If anything of weight was placed on the top of the box, the gage is likely to break. Was able to send the tank with the smashed gage back with no issue. New tank arrived in a couple of days.
-
Charles Watkins
> 3 dayI used my air tank to take lug nuts using my air impact which worked well. I also used it for my air nailer which also worked well, over all I am well pleased with this product.
-
scott walker
> 3 dayThis is the second time purchasing, the first tank was great, no problems.However this tank kept leaking, after re-sealing all the fittings and replacing the air coupler it was fine.
-
watabowtbob
> 3 daySo far so good. No complaints. So glad I have this for finish nailer and filling tires
-
Tamma D
> 3 dayLots of cool features. Very well made. I do wish it could a little more psi though
-
Mathieu M
> 3 dayNice tank, seems well made and lightweight as advertised. HOWEVER, the fittings are very low quality and I would have preferred to save $15 and not have them included. Right out of the box, the tire chuck was leaking. I removed it and noticed the quick connect leaked as well. I replaced the quick connect and filled it up again to find that the 1/4 turn shut off valve wouldnt stop air from coming back out. To top this all up, the T-junction snapped off when I was untying the valve and I had to replace that too.