Meconard 6 Pack 4 Inch 5CCT LED Recessed Lighting with Night Light, 2700K/3000K/3500K/4000K/5000K Selectable Ultra-Thin LED Recessed Ceiling Lights, 9W=75W, 750LM, Dimmable Canless Wafer Downlight

I always love these wafer lights. Very easy to install without the worries that comes with installing dome lights with cans. Just cut a 4.13 inch (105mm) hole with a hole saw and it fits snuggly into the hole and held in place with the attached spring clips even when theres obstruction like a wood beam in the way. 5 selectable color schemes was a plus so you can choose how bright your room should be.

Very easy to hook up, very satisfied

I got these to replace smaller, 3 inch recessed lights in my wifes medical practice. The holes for the old lights were too small, so I used a 4 inch hole saw with my drill to make the holes larger, but still found that I needed to notch out several places for the light to fit. They are easy to connect and can have direct contact with insulation, so it didnt take a lot of time to get them installed. The old lights had a flicker to them that causes headaches to people, but these do not seem to have the same issue and have, so far, been an excellent replacement. Im a little confused for the listing as suitable for wet locations since the only thing supporting that claim is a thin rubber-like gasket where the lights meet the ceiling. I would recommend not putting these in a shower or sauna (or similar wet area). In summary, they are reasonably priced lights that are easy to install.

I got the 6pk. I put two in my daughters closet. I replaced some old pull-string lights and tied them into a smart switch. I put the other four in my garage. It is a single-car garage and it has been configured for storage. I only had a light on the lift and even on a sunny day, this was not enough by far. Now my garage is lit up any time I need it. One thing that caught my eye was the angle of the clips (blue tabs). They are even pictured this way as well. If you ask me, they are upside down. I flipped all of mine over for a tighter fit and better grip. I like the smaller size vs your standard 5/6in retrofits. These also have a screw-on for the connector. Ive seen a lot that dont have this and it would be easy to disconnect. These are dimmable (not using dimmers) and color temp selectable. I like white, but my wife and daughter like the yellower ranges. These come with the level/push connectors inside the boxes. This saves a lot of time. But you will also need some cable clamps or the anti-slip plastic ones to keep your mains wire from getting a mind of its own. I think the price is good and the lifetime rating is very good as well.

These lights are absolutely incredible! The slim profile is so convenient and makes installation remarkably easy. No need to worry about location of joists/beams because the slim lights will fit anywhere. Each light has a junction box with pre-installed wire clips…it is as simple as sliding the electrical wire into the corresponding clip (black, white, green). You can simply run wire from one light to the next and string them together on one line. What makes these lights extra special is the nightlight feature. By simply flipping the switch on you turn the downlight on, turn the switch off and back on, and you change the light to nightlight. It really is that easy. The nightlight feature is perfect for when we want to watch movies in the theater room. The cost of these lights are so reasonable and truly cut down the yearly energy cost. I’ve seen similar lights in the big box stores with a much higher price point but there is no reason to waste money. Skip the high price and big annoying cans and install these slim recessed lights for a fraction of the cost and frustration. You’ll be glad you did!

These are nice lights that have a good finish. I like the different color options and the night light is a good idea that we love. All of my lights worked with no issues. I am pleased and I would buy again. 5 STARS

I love the ambiance light around the perimeter. These give you the ability to choose the brightness before you install via a toggle switch in the outside of the junction/led driver box. It comes with the push in wire nuts already on the wiring in the j box. This was helpful because I am using them to retrofit old can lights that took fluorescent bulbs so not a lot of slack in the existing wiring or working room. The only downside was the ground wire in the junction box is tack soldered to it instead of under a grounding screw so be gentle with that when doing connections. I broke off the first one.

These lights went up easily and quickly. I just measured my spots on the ceiling, cut the holes with a drill/hole saw. Then connected each one daisy chained. Came out beautifully.

Great value 10/10

They came in great and fast and work amazing