Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Amonios Zula
> 24 hourNoctua doesnt disappoint, my 8700k stays nice and cool :D
-
Mordhorst
> 24 hourHatte bisher eine WAKÜ aber mit dem Teil hier ist diese obsolet. Absolut unhörbar im Normalbetrieb. CPU jedoch noch nicht übertaktet. Klare kaufempfehlung. Aber vorsicht, das Teil ist riesig. Speichermodule und Gehäuse vorher checken.
-
gadgethound
> 24 hourRidiculous cooling. I had an Coolmaster 212 EVO and just couldn’t keep up with the new i7-7700k. Replaced it with this monster and dropped my temps 15C-20C. Linpack stress would run the processor at 93C-95C (100C is the max for the i7-7700K) and cause the Coolmaster to roar almost instantly, with the Noctua it barely reaches 80C and the fans are whisper quiet.
-
Mike
> 24 hourJust using a single fan on a 5600x and its nice and quiet. Temps are low. Great cooler.
-
Carlo G.
> 24 hourDavvero, non posso spiegare quanto ben fatto sia questo prodotto. La scatola è ben fatta, fornisce tutto, addirittura gli utensili per montarla cavi, riduzioni e pasta termica. Ci sono tutte le montature possibili e se ve ne manca qualcuna ve ne mancano un a casa a gratis. Spedizioni veloci da Amazon come sempre impeccabili.
-
bitlefelder.de
> 24 hourKühlt einwandfrei und leise. Dazu einwandfreier Herstellerservice - bei Mainboardwechsel / Sockelwechsel kostenlose Zusendung von neuem Befestigungsmaterial.
-
Talia Watsica
> 24 hourHave been running AIO for years so a return to air was nice
-
Tristan J
> 24 hourWorks as anticipated, even better!!! Would not recommend water cooling, water and technology never quite mixed together.
-
justanothertechie
> 24 hourI did NOT want a liquid-based cooling system for a high-powered CPU chip so chose this air cooler. The install went fine though, admittedly, I have little idea what 0.6Nm of torque feels like without a torque-settable screwdriver but am pretty sure I got close to that since, as soon as the CPU returns back to idle from a high-powered run, the temperature plummets back down to uninteresting range. The fans idle around 500rpm and are not noticeable at that speed; when the CPU is heavily engaged the fans speed up to 1500rpm and can be heard for sure. Because the mounting of the fans on the cooler is flexible w.r.t. height I was able to raise the fan nearest the front of my case to clear DRAM modules (as noted by the User Guide). Bottomline?: Im a Happy Camper with this cooling unit.
-
Marco Facchin
> 24 hourEstremamente silenziosa
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
Related products
