RepairPartsPlus for iPad 7th Gen | 8th Screen Replacement Glass Touch Digitizer Premium Kit (10.2, 7 | 8, A2197 A2198 A2200 A2270 A2428 A2429 A2430) + Home Button, Adhesive - Black

Good

I bought this product for my daughters iPad and loved the ease of use, so when my screen shattered down my personal iPad I knew I had to order from this company again. Excellent quality, very easy to install with great instruction!

It took me a few (3 ish) hours to get this accomplished but I took my time and had an issue figuring out my new home button I had to install. This is definitely not a 1 hour project in my opinion unless youre a pro. First off, Im not an overly techy person but I can be handy so for $60 vs. $300...it was worth a try. Worst case scenario, Id be spending $400 for a new IPad. Best case scenario, I saved a ton of money and learned a new skill. I do recommend watching a couple YouTube videos first before ordering and I personally watched the video AS I did the install. It helped me to visualize what to do. You Do need to be EXTREMELY careful around the right mid-lower side of your iPad. I messed up during screen removal and damaged my home button cable and had to spend an additional $10 plus lost my Touch ID capabilities by not reusing my original. With the amount of damage I had, I personally may not have been able to prevent the damage. So far quality seems about the same as my OEM, BUT I immediately put a tempered glass on as an extra layer of protection that I typically have on it but didnt when my daughter stepped on my original screen. Adhesion so far is holding appropriately.

Seriously difficult and tedious install if your glass has shattered. This is a good and complete kit but you are a rewarded with cloudy and rainbow effects on your screen. Makes the install not worth it.

I installed the new screen but a section of it was lifting even after placing the weight on the ipad. This led to the home button getting dislodged and then the screen cracking. So in the end the screen lasted less than a week of use.

New adhesive is not strong enough to hold it in place. Plus there now is an issue where the right side of my screen stops responding to finger touch and I have to restart my iPad. Never happened until the new screen was put in. Really annoying to have to restart my iPad randomly when I’m in the middle of something.

Im locked out of my iPad now because the digitizer isnt working properly. When I try to enter the lock code the digitizer converts one touch into two. Which fools the iPad into thinking you pressed it two times on the wrong numbers. Thus locking you out of the iPad

IPad screen replacement for a 7th generation. The flex cable le caused a lot of time consuming energy because the touchscreen will not function properly. The way the flex cable was taped down was also suspect. Please in the future secure the flex better. A refund for my inconvenience would be greatly appreciated. The customer just mailed in their product and it cant be repaired because of a damaged replacement.

The tool that is used to remove screws didn’t work so therefore still have to take it to a professional to have fixed which costed an additional $100.00!

This screen is a very easy replacement for the oem screen. Comes with everything you could possibly need and their customer service is fantastic. Hopefully I dont need to replace a screen again in the near future but if I do I will 100% buy from again.