amFilm Tempered Glass Screen Protector for Nintendo Switch 2017 (2-Pack)

I seriously will seek this brand out for every single electronic device I have with a screen in need of a protector (all of them). They are fantastic. Like any screen protector, they take a little practice but are flawless once applied correctly. I’ve bought these for my new Switch, and my old Switch that died still has the original protectors on by this brand from 2+ years ago with no cracks or scratches.

Im going to preface this comment by saying that Ive been installing screen protectors on my devices since at least 2004, when I got my first Playstation PSP. Ive installed a lot of screen protectors on my various devices ever since then (e.g., iPhones, iPads, PSP, Vita, DS, 3DS, etc). Im not a professional, but Ive become pretty experienced doing this! With that disclaimer out of the way, I can say that the video helped, and I had a flawless install on my Nintendo Switch. This screen protector looks FANTASTIC! Very easy installation for me. To help others that may have had issues, Id like to offer some suggestions: Firstly, try to work in a clean and well lit environment, and make sure to clean your work area, too. Get all the installation items setup and ready to use. You want to work pretty quickly, so having everything ready is very helpful. Secondly, wash your hands thoroughly! You want to remove the oils from your hands. Thirdly, Im old enough to need reading glasses, and when working on these installations, the extra magnification helps! Use the wet cleaning pad to clean the Switch screen, and then use the dry cleaning cloth to dry the screen. By wearing my reading glasses, Im able to see the screen very closely. MAKE SURE TO REMOVE EVERY SPECK OF DUST AND FINGERPRINTS FROM THE SCREEN!! If you dont you WILL have bubbles! Lastly, carefully remove the ONE piece of plastic film, per the directions (its the side that will adhere to the screen). HOLD THE EDGES OF THE SCREEN PROTECTOR! IF YOU TOUCH THE PART THAT ADHERES TO THE SCREEN, YOU WILL LEAVE YOUR FINGERPRINT ON THE BOTTOM OF THE PROTECTOR, AND IT WILL ANNOY YOU TO NO END! Now, while holding the edges of the protector (and/or the tabs on the top plastic film), carefully align the bottom edge of the protector to the Switch screen (its where the cutouts are for the sensors). Once you align the bottom AND the left & right edges, SLOWLY let the protector drop/slide into place (from bottom to top). The rest of the protector should line up perfectly, and then work out any air bubbles along the side using the card/squeegee that was provided. Remove the final piece of film, and hopefully everything will be perfect. I hope this helps someone out there. Good luck!!

First off, I dont often write reviews. I purchased this screen protector because most others had lousy reviews. Im also a fan of tempered glass vs film. At any rate, this product, as well as the company selling it, is superb. First off the product. It fits perfectly. Ive had other screen protectors on products where you line the protector on one edge and it creates a gap on the other. Not this. If you line it up to one edge, you get 100% coverage. I was REALLY impressed. It comes with the alcohol wipe, dry wipe cloth, microfiber cloth and a cardboard card to push air bubbles out. On my first application, I had a piece of fuzz underneath which really bugged me. I pulled the film up and used a piece of scotch tape to remove the fuzz and the protector went back on without issue. Looked better the SECOND time I put it on. I was so surprised this worked despite reading other forum posts about trying this. The company also emails you about your purchase and asks if theres anything they can do to assist. Nice personal touch. The fit is a little snug in the dock,but no scratches or damage. Get this item. If its back-ordered (like it was when I purchased it), just wait it out.

Does what any screen protector is supposed to do.

Ive tried a couple different screen protectors since the Switch launched but this one was by far the best in every way. But let me list them anyway: Price - You cant beat it. This product undercuts many other protectors with twice quality. Delivery - With Prime I had mine in 48hrs after purchase Application - Easy cheesy. Im very practiced with screen protectors but none of that experience was necessary. After thoroughly cleaning the screen and lining up the protector, you really only need to place the protector down on it and youre essentially done. What bubbles do appear are easily swept away by sliding them to an edge of the screen. If you arent happy with where you laid the protector down, reapplying it is not difficult at all and doesnt hurt its ability to still adhere. Just be very careful lifting up on its edges as not to bend them. Appearance - Unless youre looking hard at the edges of the screen, its like it isnt even there. Bonus - You get two for a price that is less than other products that provide only one. Great for people who really struggle with protectors or who have multiple Switches in the home. Ive bought this multiple times for friends, family and myself. All applications were smooth and successful. I recommend this to anyone who gets a Switch. After a ton of use since launch, my Switch screen looks as good as the day it came out of the box.

Ok so this is my second box to be able to get this to install. My first box had one with a bent corner that wouldn’t lay down (3rd photo) and one with a dust bubble caused by the first one. I used the included wipes. They have no smell so I don’t think they are alcohol based maybe they are just ultra pure denatured water? Theres a 1/16th inch gap at the whole bottom visible in my pictures that these aren’t quite large enough to fit the screen perfectly. Theres also a piece of dust or lint on the right edge towards the top that was in the protectors glue from the factory. I got this because of reviews online of people scratching the switches polymer screen just setting it into the dock and was really disappointed the first set were defective. I wet wiped, dry wiped, checked for dirt and smudges, found one and repeated wet and dry on that spot, removed the sticky cover, and laid it on the side and slowly lowered it from left to right. I then used my metal Amazon CC to push out the bubbles. Then removed the plastic holding tabs Presto perfect. The included cardboard bubble pusher is junk. Just make sure the plastic alignment tab protector is still on so you don’t scratch the glass with your card.

I LOVE this screen protector. I bought the Official Nintendo screen protector from the store with my Switch this morning and applied it while I was waiting for this one to come in the mail, Surprise! it showed up 7 days early and thank goodness, The official one is garbage compared to this. Cheap plastic film type protectors have a major defect. They are plastic, when you take off the first film you create a static charge which attracts dust to the underside of the protector. I had dust and dirt all under the official film protector because of the static.This product does no such thing, It went on without issues, without dust and I have a PERFECT fit. The screen protector looks like it is part of the screen. This is a MUST have for the Switch, If you only buy one accessory, Let this be it. I could not recommend this enough for ALL of your devices with a screen. Oh and for all of you screaming FAKE and PAID reviews, get a life. I was not paid or bribed in any way to write this review. People will go out of their way to complain or condemn a product, I happen to like praising a company who does things right. TechMatte went out of their way to pre ship these to customers who pre ordered to ensure they got them on launch day. I got an email from Donnie with TechMatte offering to help and even sent me video install instructions.

I bought this protective glass for my Switch. I liked that it was a two pack, because I could practice with my brothers system before attempting on mine. It installed perfectly. I did take a few extra steps Id learned from other sources. I shut myself up in the bathroom, opened the shower curtain and ran hot water till it felt muggy. This supposedly grabs any dust that may settle on your already cleaned screen. I also washed my hands to remove excess oils. I left the screen protector in its foam sleeve till I was ready for it, because Id have to align it with the film on and if dust got on it, it would transfer to the screen. Id read reports of the microfiber cleaning cloth shedding, so used one of my own. I used their wet wipe to break down the oil hed left on the screen. The recommend to wipe in circles. I did this over the whole screen and then wiped up the excess in straight lines. I dried with the microfiber. I did this twice and hit the one or two spots that were totally clean. I didnt use their drying cloth for the same fear of shedding. Once my screen was perfectly clean, I removed the protector from its foam sleeve and lined it up. There are two simple ways of determining orientation. One is that the Step 1 tab is clearly one side and it allows you to remove the protective film from the screen protector. The other way is that there are (3) asymmetrical notches to align with the bottom of the switch screen. Here is the second way I deviated from the instructions. I used the tape hinge method. I used masking tape I had on hand, but I think painters tape would have been better. Dont use duct tape as I think it would be hard to remove and leave a residue. I put a strip top and bottom, approximately 1.5 wide and 4 long. You have to put them on the right side, because youll need to remove the protective film starting from the left. Have the tape on the screen protector, but not on the system. Align the protector to the best of your ability and then, while holding it in place with your left hand, use your right to press the tap onto the system itself and make sure its firmly attached to the system and the protector. I used a thumbnail to make sure it was pressed down well into the corner formed by the protector and system. Once this is done, lift the left edge of the protector, being careful not to touch the clean screen. Grab the Step 1 tab and peel it away gently. Again, dont touch the backside of the protector once the screen is removed. Once the rear film is removed, you can set it down on the system. The tape on the right hinges and insures that it falls back and is perfectly aligned as you had it before, preventing you from having to realign once its in place, which wouldnt be easy to do. I simply set it down and it started sealing under its own weight. You could see the air getting pushed out from right to left. It was quite satisfying. Unfortunately, there was a slight bubble left at the top left of the screen. The included bubble remover is a cheap piece of cardboard. I used it, but a credit card would work just as well. It scratch the front film, but thats what its there for. I got the bubble completely removed and then peeled off the front film to reveal a perfectly attached screen protector. Ill have to try to remember to update this after constant use. I read that on some of the tighter docks, the width of the screen protector can cause it to rub. Ive also read that because its glass instead of film, it can cause a slight issue with touch sensitivity. I noticed no issue with light transmission through it, which was a main selling point. I really like this protector so far, Ill try to remember to update after some time and use have passed. It was easy to install and fit perfectly.

Quality is very good and price cheaper than other products

I have two Switches that have been dropped multiple times. The shield cracked but the screens have remained intact.