amFilm Tempered Glass Screen Protector for Nintendo Switch 2017 (2-Pack)

Does what any screen protector is supposed to do.

It was easy to install. It doesnt affect how I use or view my switch.

This is for the amFilm Tempered Glass Screen Protector for Nintendo Switch 2017 (2-Pack). Pros: Cheap cost, Delivered Fast, Has 2 Protectors you can attempt to apply to your screen Cons: Alcohol Wipes smear on the Nintendo Switch screen badly(useless item #1), Dry Wipes leave particles behind on the screen(Useless item #2), No alignment tools beyond aligning the cut outs along the bottom edge, not edge to edge so you can easily place it to far to one side and have it not aligned quite right, spot dust removal stickers not for use with the Nintendo Switch (Useless item #3), the top plastic piece with the side attachments does NOT stick very well to the glass allowing said it to fall from it onto your screen or where ever you happen to have it positioned while holding on to one of the side tabs thus leading to possibly having the glass drop onto your Switch screen in an odd angle My first attempt with the kit went very smoothly until I noticed the smears from the alcohol wipes, bubbles and small particles left from the dry wipes. I did manage to get most of the bubbles out except for a couple in the middle that i manage to some get into one bubble using the kits squeegee rectangle. However i could not get the particles from the dry wipe off the screen protector. Also could not get the smears off with the provided dry wipe. Pulled it off and cleaned the Nintendo Switch screen with some glass cleaner I have and that finally removed the smear film on the screen and grabbed the second protector in the kit. My second attempt went much, much worse. Got my screen clean this time via my own glass cleaner and a microfiber cloth. Much better results then from the first attempt. However when I went to put the protector on, the side that has the tabs you holding on to for placing the screen protector dropped the screen protector while i was trying to position it and it landed diagonally across my Nintendo Switch screen. Put the now useless piece of plastic in my hands down and pick up the protector by hand doing my best to avoid getting my fingers under the protector and then tried to get it lined up again. No luck. It just would NOT sit right and would keep angling slightly up or down on one side. after trying to align it for about 10 minutes, I got it somewhat close. proceeded to work out the small bubbles that it had and then found out I somehow got a hair stuck under the protector at some point and now basically just wasted about 30-45 minutes on this second attempt to salvage this. This could honestly just have been due to my own problem of having shaky hands, however I did manage to get the first one aligned fairly easily, shakes and all. Both of these were done in a steamy bathroom in order to cut down on the dust particles in the air as I know I live in a dusty/sandy location.(how I know that the particles in the first attempt came from the provided cloth as there were no particles on my second attempt with my own cleaning materials on the second) Conclusion: If you live in a sterile environment, can draw a smooth straight line(non-shaky hands) or have your own cleaning materials, then this kit may be for you. Honestly, the only reason I give this a 2 star rating instead of a 1 Star rating is due to the fact that the glass did feel nice and allowed the touch screen to function. Personally I dont recommend this kit at all. After posting this comment I will be looking for a kit that has an alignment tool and/or a better method of application than this kit has.

Pros: -Installation was easy. -Included wipes are great and leave no dust/fibers behind. -Feels good to the touch; better than the bare screen in my opinion. -Fits the screen extremely well. -Unnoticeable while playing. -Comes with 2 screen protectors, as well as additional wipes and hinge tape for a second installation. -Bubble free (see comments below). Cons: -Packaged instructions are a bit lacking. -Included card for pushing out bubbles is weak. Comments: First off, regarding my previous bubble free comment: when I first installed the screen protector, I was worried, because there were 2 very noticeable bubbles that I couldnt work out. I thought I was going to have to take it off and try again with the second screen protector, but I had read comments from other people saying they had bubbles that worked themselves out over several hours. Left it on overnight, checked first thing in the morning, and the bubbles were gone! Cutouts for holes are perfect - not too large or too small, and perfectly spaced. The handles on the sides are great; they make it easy to position the screen protector without touching the adhesive. The printed instructions arent fantastic, but they do have an installation video on YouTube which is better (although the video could be improved by including narration/spoken instructions). The card they include for pushing out air bubbles is a somewhat firm piece of cardboard, but mine started to bend a bit toward the end of trying to push out the bubbles. I guess it did the trick, but plastic would have been better. Once installed, it does add a little bit of thickness to the screen, and you can definitely feel the bump up if you run your from an attached joycon onto the screen. Not necessarily good or bad, but worth mentioning, I suppose. Honestly, the cons are not a huge deal, are easily remedied, and completely irrelevant once you have it on. The Switch really needs a screen protector if you plan on taking it around much at all and $10 for the protection offered by this one is hard to beat, especially when it comes with a second one you can use if you mess up the first time, or if the first one gets scratched, or you can give to a friend or family member who has another Switch.

My Switch fell; this screen protector cracked. The Switch glass did not. Product works!

I have found that the Nintendo Switch is one of those things it is -actually- necessary to use a screen protector on. The way the console is designed and used, the bezel will get severely scratched without one, unless you are extremely careful all the time. But who wants to take that risk with their new console(especially when replacing it might take months)? I have used the Nintendo brand soft protector, which left bubbles, and then was scratched as I tried to remove the bubbles with the card that comes with it. I used another glass protector which was impossible to align and difficult to remove if you had to adjust the position. This protector was easy to put on, forgiving if you needed to readjust, and has no bubbles. The only perfect protector I have seen so far. Tempered glass is, in my opinion, the best kind of screen protector because if you drop your console and the glass does break, it wont scratch your screen, and it provides the best level of regular screen protection while preserving touch sensitivity. As a gamer, I highly recommend this specific screen protector.

upper left corner wont stick, so I have an air bubble that I cant get rid of. followed the instructions to a T.

The screen protector is very good quality and easy to install. No air bubbles to deal with if you follow their instructions. Having 2 of them for this price is almost unbelievable. Very happy with the purchase.

The screen protectors seem to be about the same quality as Nintendo ones. Though, I prefer these because they were on sale and the application was extremely easy.

This is by far the best screen protector I have ever applied for a device. I simply followed the instructions and it came out great, with no air bubbles or visible dust on the screen! The pack comes with two glass screen protectors, hinge stickers, dust removal stickers, a cleaning cloth, Styrofoam card, wet cleaning pad, and a dry cleaning pad. Anything you need for the process is in the box. Here are the steps I performed for the perfect installation: 1. Run a hot shower for approximately 10 minutes 2. Clean the bathroom counter thoroughly 3. Line up the screen protector where you want it on your Switch 4. Use hinge stickers to attach the screen protector to your switch so that you can flip it back and forth, like the cover of a book 5. Thoroughly clean the actual screen of the switch, first with the alcohol wipe, then with the dry wipe 6. Remove the sticky side plastic off the glass of the screen protector and use the plastic tabs on the side to help guide it down 7. Use the included card and cleaning cloth to remove any additional air bubbles. 8. Play Zelda without any worry of scratching the screen!