













ELEGOO Saturn 2 MSLA 3D Printer, UV Resin Photocuring Printer with 10-inch 8K Monochrome LCD, 219x123x250mm³ / 8.62x4.84x9.84 in³ Large Printing Size
-
Jerry
> 3 dayThis printer is not ready for prime time. Suffers from various QC issues: uneven build plate, uneven vat, USB stops working, included level card is too thick and leads to constant print failures. I was able to get past most of these issues and get some successful prints, but the quality was subpar for what is advertised. I even bought 2 bottles of Elegoos 8K resin and still had major quality issues. After 2 weeks of use, my Saturn 2 will no longer print for longer than an hour. It will lockup and reboot causing my prints to fail. Has happened to me 3 times in a row today. Ive lost half a bottle of their expensive 8K resin to print failures. Turns out a 64GB flash drive wont work despite my using a 256GB before. Buggy firmware. Support is very responsive. But they promised to send me replacement resin and never did. Im passed the return period and now stuck with it. I wish I would have returned it and got a different model or brand. The price is way too high for the high resin waste and mediocre quality of prints that are actually successful. Wait for this model to get refreshed in a year or buy the more established Elegoo Mars line.
-
Dana
> 3 dayThis printer is of a larger form factor which gave me some hesitation, but I must admit that it performed (and still performing) wonderfully. I have printed about 2 dozen different items with 1 failed print (which was my fault) Note that this is my 1st exposure to resin 3D printing and I had it up and running in 30 minutes. I got the wash and cure stations as well. All are elegantly designed and easy to use. Only thing I wish is that the printer was wifi enabled, but otherwise its fantastic!!!!
-
J. Sanchez
> 3 dayI love my machine! The prints are fantastic. I had a problem with my machine and the Elegoo support staff helped me no problem at all. They sent me a new machine right away. Thank you!
-
Monte Greenholt
> 3 dayReceived my printer with what turned out to be a defective LCD. Emailed customer service and after a few back and forth emails for troubleshooting, they sent me a new LCD. Because of there very detailed videos, the LCD was easy to replace and printer is working. I bought this to augment my Mars 2 Pro for the larger build volume and higher resolution. Could not be any more pleased with the quality of the printer, the quality of the prints and the excellent customer service! Look forward to seeing what products they offer in the future.
-
Ruperto
> 3 dayIm at a 50/50 success rate. When I actually do make a successful print its great. Maybe user error. The elegoo Saturn is nice.
-
LifeWithACrowd
> 3 dayI had heard about the Elegoo Saturn for a while on several 3D printing Discords, but couldnt ever find one at the intended price. One day I just happened to look and there it was. Just a few short days after ordering it it arrived at my door. I did have some issues with the prints for a few weeks, it wouldnt adhere to the middle of the build plate. Of course it was my haste in setting it up that caused the issue. I just never made sure the FEP was tightened down enough. Once I got that issue solved, I could utilize the entire build plate and I was printing so many minis at once. The picture attached is just a small fraction of the minis Ive printed. I absolutely love this machine, and cannot ever print enough on it. I definitely recommend this product and any Elegoo product, Ive been using their resin for over a year and their wash and cure machine. Too notch quality, awesome customer service, and for a really good price! Just make sure you check that your FEP is tight enough when setting it up!
-
Chris Montgomery
> 3 dayThis is my first resin printer and Im absolutely in love with it. It is so much easier to set up and use in comparison to PLA. Beyond that, the software and tech support staff has gone above and beyond to help me when Ive had issues. My build plate bolts werent the right size and were stripping the female holders. A quick trip to the hardware store fixed it and the support staff immediately shipped me replacements. 10/10 customer service. I will say, check the tightness of all of the bolts and screws when yours arrives as there are many people on the subreddit that have reported build plate failures due to loose hardware.
-
Ron
> 3 dayI purchased two of these units to add to my maker workshop. We build studio scale models for the gaming and movie studios and been using 3D FDM printers for years. I was excited to try SLA printers to capture even higher detail but the experience hasnt been great. Were only having about a 40-60% print success rate on both machines. We have tried numerous print settings, and have consumed countless FEP sheets, resin and IPA due to failures. We are using Elegoo resin with its recommended settings and still with limited success. When the prints do succeed they are beautiful but at the cost of failure, it just to hight to continue using these units.
-
terry wheeler
> 3 dayI was finally able to buy a Saturn and I must say from set up to first part this machine does an excellent job. I did have one minor problem but Elegoo customer service took care of it right away. Great machine. Great customer service.
-
CodeMonkey
> 3 dayI have an Elegoo Mars and then Saturn. No major issues yet. Love the network send option...